Compare commits

...
Author SHA1 Message Date
Morris d7f6d8de9f build: 默认编 Flutter 前端,补 Linux 目标并按主机选择产物
此前 build.sh 在非 Windows 宿主上把前端当「可选项」:flutter 缺失只告警、
交叉编译失败只告警、macOS 前端在 Linux 上直接跳过。结果是包照出,用户拿到
的是 Avalonia 回退界面,而构建日志里一行红字很容易被忽略。

改为默认必需:
- build_flutter_ui / build_flutter_ui_cross 缺 flutter 或编译失败一律返回非 0,
  build.sh 立即中断并给出原因(交叉编译失败时带日志尾巴)
- 确实要出降级包时显式声明 ./build.sh build --allow-no-ui

目标平台按构建主机决定,每条产物都带 Flutter:
  macOS 主机 → mac-arm64(Xcode 原生)+ win-amd64/win-arm64(mingw 交叉)
  Linux 主机 → linux-amd64(原生)+ win-amd64/win-arm64(mingw 交叉)
  Windows 主机 → win-amd64/win-arm64(原生)

Linux 目标此前根本不存在,这次一并补上:
- GC-UI/frontend/linux/ 由 flutter create 生成,BINARY_NAME=GC-UI、
  APPLICATION_ID=com.xhmcl.GC、窗口标题 "Morris GC"
- build_flutter_ui 增加 linux 分支,bundle(GC-UI + lib/ + data/)铺进
  dist/linux-amd64/,pack_launcher 增加 Linux 整目录打包
- linux/CMakeLists.txt 强制 CMAKE_INSTALL_PREFIX 指向 build/.../bundle:
  某些环境下它会被初始化成 /usr/local,导致 flutter 报「构建成功」但
  bundle 是空的、产物装进了系统目录(本机实测踩到)

顺带修正两处:
- 生成 settings.json 的默认 updateRepository 还是 gitcode 地址,与只保留
  xhmcl 源的现状不符
- 进度条权重改为按实际目标动态计算,新平台不会再把总进度算过 100%

验证(Linux 主机,flutter 3.24.5):
- ./build.sh build 出 win-amd64 109 MB、win-arm64 105 MB、linux-amd64 65 MB,
  三份均含 Flutter 前端,清单签名 Verified
- Linux 包在 Xvfb + llvmpipe 下实跑:后端 /api/health 返回 ok,GC-UI 窗口
  正常渲染出模型库首页
- macOS 目标在 Linux 上不再产出 Avalonia 空壳包(要它得回 macOS 编)
2026-11-18 19:15:05 +08:00
Morris e327a56421 fix(update): 换发清单签名密钥,补齐 1.0.9 已签名清单
仓库里硬编码的公钥 gc-2026-11 没有对应的私钥(.signing/ 在 .gitignore 里,
私钥从来没入过库,也无法找回),导致 build.sh 每次签名都失败,version.json
始终是「未签名」。而客户端默认 RequireSignedManifest=true,未签名清单一律
拒绝更新 —— 自动更新实际上完全不可用。

改动:
- keygen 生成新密钥 gc-2026-12(指纹 ee6083be47a87907),公钥写进
  SignatureKeyring;旧 gc-2026-11 保留一个版本周期,标注为「私钥遗失、已停用」
- GC-SAVEDOG 的 DefaultKeyId 与 build_funcs.sh 的 GC_SIGNING_KEY_ID 默认值
  同步改为 gc-2026-12,避免 keyId 与私钥不匹配又签出 Invalid
- GC.Tests 构造可信清单时用的 keyId 改为 gc-2026-12(原来硬编码旧 keyId,
  换钥匙后会判成 Invalid)
- README 补上密钥轮换的实际步骤与「换钥匙老客户端就更新不了」的代价
- Directory.Build.props 版本 1.0.7 → 1.0.9(此前只靠 -version 传参,
  仓库里一直停在 1.0.7,与实际发布脱节)
- version.json / model/version.json 换成 1.0.9 且带 gc-2026-12 签名,
  两份字节一致

验证:
- GC.Tests --update-test 全通过,日志里是「清单验签通过(gc-2026-12)」,
  篡改清单被判 Invalid 并拒绝更新
- GC-SAVEDOG verify --manifest version.json → Verified
- 三平台重新出包:win-amd64 109 MB、win-arm64 105 MB、mac-arm64 57 MB

注意:1.0.8 及更早的客户端只认识旧公钥,这份清单在它们眼里是「签名无效」,
与之前的「未签名」等价 —— 都不会自动更新。要让自动更新真正生效,需要把
带新公钥的 1.0.9 发出去。
2026-11-18 18:20:32 +08:00
Morris 40e72957e3 Merge pull request 'build: 支持在 Linux/macOS 上交叉编译 Windows 前端' (#7) from feat/win-cross-compile into main
Reviewed-on: Morris/GC#7
2026-11-18 10:09:49 +00:00
Morris fdbf3160e8 fix(update): 更新清单指向 xhmcl 仓库,下载地址与 tag 对齐
VersionStamp 里硬编码的仓库地址还是 gitcode.com/Morris_1/GC,与启动器
AppSettings.UpdateRepository 的默认值(git.xhmcl.com/Morris/GC)不一致,
导致生成的 version.json 把客户端导到一个没有对应 Release 的仓库。

同时下载地址拼的是 /download/v{版本}/,而实际 tag 没有 v 前缀
(1.0.7、1.0.8),两者对不上会 404。

改为读同一仓库地址并去掉 v 前缀,同时把当前 1.0.8 的清单同步过来
(sha256 沿用本次构建产物,未重算)。
2026-11-18 13:54:15 +08:00
Morris 2cc862a8da Merge pull request '启动器接入 Flutter 前端 · 公司信息统一 Morris · 模型版本 +1' (#6) from feat/flutter-ui into main
Reviewed-on: Morris/GC#6
2026-11-18 05:47:39 +00:00
Morris 2c0c566c81 build: 支持在 Linux/macOS 上交叉编译 Windows 前端
此前 Windows 包内不含 Flutter 界面,只能回退到内置 Avalonia 界面,
原因是 Flutter 官方不支持在非 Windows 主机上执行 flutter build windows。

实际上 Windows 嵌入层(windows/runner + cpp_client_wrapper)是纯 Win32
加标准 C++,只通过 C ABI 调用 flutter_windows.dll,因此用 mingw-w64 即可
编译。整条链路上唯一必须执行的 Windows 二进制是 AOT 快照生成器
gen_snapshot.exe,交给 wine 运行即可。全流程不需要 Windows 机器或 MSVC。

实现:
- buildsh/cross/toolchain-mingw.cmake  CMake 交叉工具链,posix 线程模型,
  静态链接 libstdc++/libgcc,产物只依赖系统 DLL 和 flutter_windows.dll
- buildsh/cross/CMakeLists.txt         只编 C++ 外壳,绕开 tool_backend.bat
  与 MSVC 专用编译参数
- buildsh/cross/build-ui-win-cross.sh  拉取引擎产物、为 gen_snapshot 装 wine
  包装、生成 AOT 快照、组装出与官方 toolchain 一致的目录结构
- build_flutter_ui_cross / build.sh    非 Windows 主机走交叉编译分支,
  x64 产物同时放进 win-amd64 与 win-arm64 两个包

顺带修掉 shell.dart 的常量求值错误:强调色改为跟随设置的动态 getter 后,
const Text 里引用 GcColors.accent 会让编译器报错。

已在 Linux 上用 wine 验证产物:Flutter 引擎正常初始化,Dart AOT 快照加载
并执行到业务代码,后端 /api/health 正常返回。
2026-11-18 13:29:53 +08:00
Morris 926a568dc0 Merge branch 'main' into feat/flutter-ui 2026-11-18 04:37:15 +00:00
Morris cd44c7ecff feat(ui): 启动器接入 Flutter 前端 · 公司名统一 Morris · 模型版本 +1
- GC-BOOT 新增 FlutterShell:随包带 GC.UI.Server 与 GC-UI 时,拉起「本地后端 + Flutter 窗口」,界面退出后一起收尾;缺任一产物则回退内置 Avalonia 界面
- 构建脚本新增 publish_backend(三平台发布 UI 后端)与 build_flutter_ui(宿主平台构建 Flutter 桌面产物)
- Windows 打包由「单文件 exe」改为整目录,包含启动器、GC-SAVEDOG、UI 后端与可选 Flutter 产物
- Flutter 工程:Windows BINARY_NAME 与 macOS PRODUCT_NAME 改为 GC-UI,窗口标题 Morris GC
- 公司信息:Windows CompanyName/LegalCopyright、macOS PRODUCT_COPYRIGHT 统一为 Morris
- 模型版本末位 +1:contour-map 1.1 / earth-geography 1.9 / earth-revolution 1.7 / earth-rotation 1.7 / scale-calculator 1.6,并重算清单哈希
2026-11-18 12:36:21 +08:00
Morris aeab68d421 Merge pull request 'chore: 彻底移除 NeoRF 标识(命名空间 / 作者 / Bundle ID)' (#5) from chore/remove-neorf into main
Reviewed-on: Morris/GC#5
2026-11-17 22:55:44 +00:00
Morris 0b2f263dea chore: 彻底移除 NeoRF 标识,统一为 GC / Morris
- 命名空间 NeoRF.EarthModels / NeoRF.ContourMap / NeoRF.ScaleCalculator
  改为 GC.EarthModels / GC.ContourMap / GC.ScaleCalculator
- 模型清单 type 字段同步更新,五个模型 DLL 全部重新编译并替换
- 程序集 Company 由 NeoRF 改为 Morris
- 模型作者 author 统一为 Morris(原 NeoRF / Morris GC)
- macOS 包标识 cn.neorf.GC 改为 com.xhmcl.GC
- 重算 version.json 与 model/version.json 的 build / manifestSha256 / filesSha256
2026-11-18 06:55:10 +08:00
Morris a18d0ea1a8 Merge pull request '关于页开发者改为读取仓库真实提交者(身份归并 + 排除自动化账号)' (#4) from fix/about-contributors into main
Reviewed-on: Morris/GC#4
2026-11-17 22:52:38 +00:00
79 changed files with 1412 additions and 203 deletions

No files matched your search

+2 -2
View File
@@ -22,8 +22,8 @@
-->
<AvaloniaVersion>11.3.9</AvaloniaVersion>
<MvvmVersion>8.2.2</MvvmVersion>
<Version>1.0.7</Version>
<Company>NeoRF</Company>
<Version>1.0.9</Version>
<Company>Morris</Company>
<Product>GC</Product>
<NeutralLanguage>zh-Hans</NeutralLanguage>
</PropertyGroup>
+179
View File
@@ -0,0 +1,179 @@
using System;
using System.Diagnostics;
using System.IO;
using System.Net.Http;
using System.Threading;
using System.Threading.Tasks;
namespace GC;
/// <summary>
/// 新界面启动壳。
///
/// 发布包同时带 <c>GC.UI.Server</c>(本地 HTTP 后端 + 模型窗口宿主)和
/// <c>GC-UI</c>(Flutter 前端)时,启动器只做三件事:
/// 1. 拉起后端并等 <c>/api/health</c> 就绪;
/// 2. 拉起 Flutter 窗口;
/// 3. 界面退出后关掉后端。
///
/// 两个产物缺任意一个就返回 <c>false</c>,由调用方回退到内置 Avalonia 界面——
/// 这样 `dotnet run`、只编了启动器的开发场景、以及交叉编译缺前端产物的包都能正常打开。
/// </summary>
internal static class FlutterShell
{
/// <summary>与 GC-UI/frontend 的默认 baseUrl 保持一致,前端不需要额外配置。</summary>
private const int Port = 17890;
private static readonly HttpClient Http = new() { Timeout = TimeSpan.FromSeconds(1.5) };
private static Process? _backend;
public static bool TryRun(string[] args)
{
var dir = AppContext.BaseDirectory;
var backendPath = FindBackend(dir);
var uiPath = FindUi(dir);
if (backendPath == null || uiPath == null) return false;
// 用户可能重复启动:已有后端在跑就直接复用,退出时也不要关掉别人的进程。
var reused = IsHealthy();
if (!reused)
{
_backend = Start(backendPath, $"--port {Port}", dir);
if (_backend == null) return false;
if (!WaitHealthy(TimeSpan.FromSeconds(25)))
{
Stop(_backend);
_backend = null;
return false;
}
}
AppDomain.CurrentDomain.ProcessExit += (_, _) => Stop(_backend);
var ui = Start(uiPath, null, dir);
if (ui == null)
{
Stop(_backend);
_backend = null;
return false;
}
ui.WaitForExit();
Stop(_backend);
_backend = null;
return true;
}
// ---------------------------------------------------------------- 产物定位
private static string? FindBackend(string dir)
{
foreach (var name in OperatingSystem.IsWindows()
? new[] { "GC.UI.Server.exe", "GC.UI.Server" }
: new[] { "GC.UI.Server", "GC.UI.Server.exe" })
{
var path = Path.Combine(dir, name);
if (File.Exists(path)) return path;
}
return null;
}
/// <summary>
/// Flutter 桌面产物。
/// macOS 是 <c>GC-UI.app/Contents/MacOS/GC-UI</c>;Windows 是 <c>GC-UI.exe</c>;
/// Linux 是 <c>GC-UI</c>。
/// </summary>
private static string? FindUi(string dir)
{
if (OperatingSystem.IsMacOS())
{
var exe = Path.Combine(dir, "GC-UI.app", "Contents", "MacOS", "GC-UI");
if (File.Exists(exe)) return exe;
}
foreach (var name in OperatingSystem.IsWindows() ? new[] { "GC-UI.exe" } : new[] { "GC-UI" })
{
var path = Path.Combine(dir, name);
if (File.Exists(path)) return path;
}
return null;
}
// ---------------------------------------------------------------- 进程管理
private static Process? Start(string fileName, string? arguments, string workingDirectory)
{
try
{
var info = new ProcessStartInfo(fileName)
{
WorkingDirectory = workingDirectory,
UseShellExecute = false,
CreateNoWindow = true,
};
if (!string.IsNullOrEmpty(arguments)) info.Arguments = arguments;
// macOS .app 内的二进制也需要可执行位;发布包由 zip 解开时可能丢失。
if (!OperatingSystem.IsWindows())
{
try { File.SetUnixFileMode(fileName, UnixFileMode.UserRead | UnixFileMode.UserWrite | UnixFileMode.UserExecute); }
catch { /* 权限不足时交给系统判断 */ }
}
return Process.Start(info);
}
catch (Exception ex)
{
Console.Error.WriteLine($"[shell] 启动失败 {fileName}: {ex.Message}");
return null;
}
}
private static void Stop(Process? process)
{
if (process == null) return;
try
{
if (!process.HasExited) process.Kill(entireProcessTree: true);
}
catch (Exception ex)
{
Console.Error.WriteLine($"[shell] 关闭后端失败: {ex.Message}");
}
finally
{
process.Dispose();
}
}
// ---------------------------------------------------------------- 健康检查
private static bool IsHealthy()
{
try
{
using var response = Http.GetAsync($"http://127.0.0.1:{Port}/api/health")
.GetAwaiter().GetResult();
return response.IsSuccessStatusCode;
}
catch
{
return false;
}
}
private static bool WaitHealthy(TimeSpan timeout)
{
var deadline = DateTime.UtcNow + timeout;
while (DateTime.UtcNow < deadline)
{
// 后端进程已经退出就没必要再等:端口被占、依赖缺失都会走这里。
if (_backend is { HasExited: true }) return false;
if (IsHealthy()) return true;
Thread.Sleep(250);
}
return false;
}
}
+3
View File
@@ -18,6 +18,9 @@ internal static class Program
// 上次下载的启动器新版,到这次启动才应用
if (DownloadModuleHost.Factory.TryApplyPending(paths)) return;
// 发布包带 Flutter 前端时,界面交给它;没带则回退到内置 Avalonia 界面。
if (FlutterShell.TryRun(args)) return;
BuildAvaloniaApp().StartWithClassicDesktopLifetime(args);
}
+1 -1
View File
@@ -23,7 +23,7 @@ namespace GC.Savedog;
/// </summary>
internal static class Program
{
private const string DefaultKeyId = "gc-2026-11";
private const string DefaultKeyId = "gc-2026-12";
private const string DefaultKeyPath = ".signing/gc-signing.pem";
private static int Main(string[] args)
+68 -2
View File
@@ -64,9 +64,75 @@ Windows 还需要 **VS Build Tools 的「使用 C++ 的桌面开发」工作负
## 本地构建(不经 CI)
```bash
# macOS
# 按构建主机自动选目标,每条产物都带 Flutter 前端:
# macOS 主机 → mac-arm64(原生)+ win-amd64 / win-arm64(mingw 交叉)
# Linux 主机 → linux-amd64(原生)+ win-amd64 / win-arm64(mingw 交叉)
# Windows 主机 → win-amd64 / win-arm64(原生)
./build.sh build
# 前端是必需项:flutter 缺失或编译失败会直接中断,
# 确需降级成只有 Avalonia 回退界面的包时才用:
./build.sh build --allow-no-ui
# 只编 macOS 前端
./GC-UI/build-ui.sh macos
# Windows
# Windows 主机原生构建
GC-UI\build-ui.cmd
```
### Linux 前端(原生)
Flutter 的 Linux 桌面端只能在 Linux 上编,需要 GTK3 开发库与 C++ 工具链:
```bash
sudo apt install clang cmake ninja-build pkg-config libgtk-3-dev libstdc++-14-dev
```
`libstdc++-14-dev` 容易漏:clang 18 会去 `/usr/lib/gcc/x86_64-linux-gnu/14/` 找
`-lstdc++`,系统只装了 gcc-13 的开发包时链接会失败,报 `cannot find -lstdc++`。
产物布局:`GC-UI` + `lib/libflutter_linux_gtk.so` + `data/`,与官方 `flutter build
linux` 的 bundle 一致,直接铺进 `dist/linux-amd64/`。
### Windows 前端交叉编译
Flutter 官方不支持在非 Windows 主机上 `flutter build windows`,但 Windows 嵌入层
(`windows/runner/*.cpp` + `cpp_client_wrapper`)是纯 Win32 + 标准 C++,只通过 C ABI
调用 `flutter_windows.dll`,所以 mingw-w64 就能编译。整条链路上唯一必须执行的
Windows 二进制是 AOT 快照生成器 `gen_snapshot.exe`,交给 wine 跑即可。
```bash
# 依赖
sudo apt install mingw-w64 cmake ninja-build wine # Linux
brew install mingw-w64 cmake ninja # macOS
brew install --cask wine-stable # macOS 的 wine
# 单独构建(默认输出到 GC-UI/frontend/build/windows/x64/runner/Release)
./buildsh/cross/build-ui-win-cross.sh [输出目录]
```
产物与官方 toolchain 完全一致,可直接拷到 Windows 运行:
```
GC-UI.exe flutter_windows.dll data/{icudtl.dat, app.so, flutter_assets/}
```
实现分三层:
| 文件 | 职责 |
|---|---|
| `buildsh/cross/toolchain-mingw.cmake` | CMake 交叉工具链(posix 线程模型,静态链接 libstdc++,产物只依赖系统 DLL) |
| `buildsh/cross/CMakeLists.txt` | 只编 C++ 外壳;绕开 `tool_backend.bat` 与 MSVC 专用参数 |
| `buildsh/cross/build-ui-win-cross.sh` | 拉引擎产物、装 `gen_snapshot` 的 wine 包装、生成 AOT 快照、组装 |
两个容易踩的坑,脚本里已处理:
- `flutter_tools` 会 exec 路径为 `.../windows-x64-release/gen_snapshot`(**没有 `.exe`**)
的文件,所以脚本在原 `.exe` 旁边放一个同名 shell 脚本转调 wine。
- `Runner.rc` 在 windres 下有两处不兼容:图标用反斜杠相对路径、`VERSION_AS_STRING`
依赖命令行传 `-D` 的转义字符串。脚本生成一份路径与宏都已规整的 rc 副本再编译。
`.gitea/workflows` 里的 `windows` 任务仍然跑在 `windows-latest` 上;若手头只有 macOS/Linux
构建机,可以把该任务的 `runs-on` 换成对应标签,直接复用这套交叉编译脚本,
不再需要 VS Build Tools。
+3
View File
@@ -15,6 +15,9 @@ migration:
- platform: root
create_revision: dec2ee5c1f98f8e84a7d5380c05eb8a3d0a81668
base_revision: dec2ee5c1f98f8e84a7d5380c05eb8a3d0a81668
- platform: linux
create_revision: dec2ee5c1f98f8e84a7d5380c05eb8a3d0a81668
base_revision: dec2ee5c1f98f8e84a7d5380c05eb8a3d0a81668
- platform: macos
create_revision: dec2ee5c1f98f8e84a7d5380c05eb8a3d0a81668
base_revision: dec2ee5c1f98f8e84a7d5380c05eb8a3d0a81668
+1 -1
View File
@@ -140,7 +140,7 @@ class _Sidebar extends StatelessWidget {
borderRadius: BorderRadius.circular(8),
),
alignment: Alignment.center,
child: const Text(
child: Text(
'◎',
style: TextStyle(fontSize: 14, color: GcColors.accent),
),
+1
View File
@@ -0,0 +1 @@
flutter/ephemeral
+146
View File
@@ -0,0 +1,146 @@
# Project-level configuration.
cmake_minimum_required(VERSION 3.10)
project(runner LANGUAGES CXX)
# The name of the executable created for the application. Change this to change
# the on-disk name of your application.
set(BINARY_NAME "GC-UI")
# The unique GTK application identifier for this application. See:
# https://wiki.gnome.org/HowDoI/ChooseApplicationID
set(APPLICATION_ID "com.xhmcl.GC")
# Explicitly opt in to modern CMake behaviors to avoid warnings with recent
# versions of CMake.
cmake_policy(SET CMP0063 NEW)
# Load bundled libraries from the lib/ directory relative to the binary.
set(CMAKE_INSTALL_RPATH "$ORIGIN/lib")
# Root filesystem for cross-building.
if(FLUTTER_TARGET_PLATFORM_SYSROOT)
set(CMAKE_SYSROOT ${FLUTTER_TARGET_PLATFORM_SYSROOT})
set(CMAKE_FIND_ROOT_PATH ${CMAKE_SYSROOT})
set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
endif()
# Define build configuration options.
if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
set(CMAKE_BUILD_TYPE "Debug" CACHE
STRING "Flutter build mode" FORCE)
set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS
"Debug" "Profile" "Release")
endif()
# Compilation settings that should be applied to most targets.
#
# Be cautious about adding new options here, as plugins use this function by
# default. In most cases, you should add new options to specific targets instead
# of modifying this function.
function(APPLY_STANDARD_SETTINGS TARGET)
target_compile_features(${TARGET} PUBLIC cxx_std_14)
target_compile_options(${TARGET} PRIVATE -Wall -Werror)
target_compile_options(${TARGET} PRIVATE "$<$<NOT:$<CONFIG:Debug>>:-O3>")
target_compile_definitions(${TARGET} PRIVATE "$<$<NOT:$<CONFIG:Debug>>:NDEBUG>")
endfunction()
# Flutter library and tool build rules.
set(FLUTTER_MANAGED_DIR "${CMAKE_CURRENT_SOURCE_DIR}/flutter")
add_subdirectory(${FLUTTER_MANAGED_DIR})
# System-level dependencies.
find_package(PkgConfig REQUIRED)
pkg_check_modules(GTK REQUIRED IMPORTED_TARGET gtk+-3.0)
add_definitions(-DAPPLICATION_ID="${APPLICATION_ID}")
# Define the application target. To change its name, change BINARY_NAME above,
# not the value here, or `flutter run` will no longer work.
#
# Any new source files that you add to the application should be added here.
add_executable(${BINARY_NAME}
"main.cc"
"my_application.cc"
"${FLUTTER_MANAGED_DIR}/generated_plugin_registrant.cc"
)
# Apply the standard set of build settings. This can be removed for applications
# that need different build settings.
apply_standard_settings(${BINARY_NAME})
# Add dependency libraries. Add any application-specific dependencies here.
target_link_libraries(${BINARY_NAME} PRIVATE flutter)
target_link_libraries(${BINARY_NAME} PRIVATE PkgConfig::GTK)
# Run the Flutter tool portions of the build. This must not be removed.
add_dependencies(${BINARY_NAME} flutter_assemble)
# Only the install-generated bundle's copy of the executable will launch
# correctly, since the resources must in the right relative locations. To avoid
# people trying to run the unbundled copy, put it in a subdirectory instead of
# the default top-level location.
set_target_properties(${BINARY_NAME}
PROPERTIES
RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/intermediates_do_not_run"
)
# Generated plugin build rules, which manage building the plugins and adding
# them to the application.
include(flutter/generated_plugins.cmake)
# === Installation ===
# By default, "installing" just makes a relocatable bundle in the build
# directory.
set(BUILD_BUNDLE_DIR "${PROJECT_BINARY_DIR}/bundle")
# 无条件强制安装到 build 目录下的 bundle:某些环境下 CMAKE_INSTALL_PREFIX
# 会被初始化成 /usr/local,导致 flutter build linux 声称成功、却把产物装进
# 系统目录,build/.../bundle 是空的。
set(CMAKE_INSTALL_PREFIX "${BUILD_BUNDLE_DIR}" CACHE PATH "Flutter bundle 输出目录" FORCE)
# Start with a clean build bundle directory every time.
install(CODE "
file(REMOVE_RECURSE \"${BUILD_BUNDLE_DIR}/\")
" COMPONENT Runtime)
set(INSTALL_BUNDLE_DATA_DIR "${CMAKE_INSTALL_PREFIX}/data")
set(INSTALL_BUNDLE_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib")
install(TARGETS ${BINARY_NAME} RUNTIME DESTINATION "${CMAKE_INSTALL_PREFIX}"
COMPONENT Runtime)
install(FILES "${FLUTTER_ICU_DATA_FILE}" DESTINATION "${INSTALL_BUNDLE_DATA_DIR}"
COMPONENT Runtime)
install(FILES "${FLUTTER_LIBRARY}" DESTINATION "${INSTALL_BUNDLE_LIB_DIR}"
COMPONENT Runtime)
foreach(bundled_library ${PLUGIN_BUNDLED_LIBRARIES})
install(FILES "${bundled_library}"
DESTINATION "${INSTALL_BUNDLE_LIB_DIR}"
COMPONENT Runtime)
endforeach(bundled_library)
# Copy the native assets provided by the build.dart from all packages.
set(NATIVE_ASSETS_DIR "${PROJECT_BUILD_DIR}native_assets/linux/")
install(DIRECTORY "${NATIVE_ASSETS_DIR}"
DESTINATION "${INSTALL_BUNDLE_LIB_DIR}"
COMPONENT Runtime)
# Fully re-copy the assets directory on each build to avoid having stale files
# from a previous install.
set(FLUTTER_ASSET_DIR_NAME "flutter_assets")
install(CODE "
file(REMOVE_RECURSE \"${INSTALL_BUNDLE_DATA_DIR}/${FLUTTER_ASSET_DIR_NAME}\")
" COMPONENT Runtime)
install(DIRECTORY "${PROJECT_BUILD_DIR}/${FLUTTER_ASSET_DIR_NAME}"
DESTINATION "${INSTALL_BUNDLE_DATA_DIR}" COMPONENT Runtime)
# Install the AOT library on non-Debug builds only.
if(NOT CMAKE_BUILD_TYPE MATCHES "Debug")
install(FILES "${AOT_LIBRARY}" DESTINATION "${INSTALL_BUNDLE_LIB_DIR}"
COMPONENT Runtime)
endif()
@@ -0,0 +1,88 @@
# This file controls Flutter-level build steps. It should not be edited.
cmake_minimum_required(VERSION 3.10)
set(EPHEMERAL_DIR "${CMAKE_CURRENT_SOURCE_DIR}/ephemeral")
# Configuration provided via flutter tool.
include(${EPHEMERAL_DIR}/generated_config.cmake)
# TODO: Move the rest of this into files in ephemeral. See
# https://github.com/flutter/flutter/issues/57146.
# Serves the same purpose as list(TRANSFORM ... PREPEND ...),
# which isn't available in 3.10.
function(list_prepend LIST_NAME PREFIX)
set(NEW_LIST "")
foreach(element ${${LIST_NAME}})
list(APPEND NEW_LIST "${PREFIX}${element}")
endforeach(element)
set(${LIST_NAME} "${NEW_LIST}" PARENT_SCOPE)
endfunction()
# === Flutter Library ===
# System-level dependencies.
find_package(PkgConfig REQUIRED)
pkg_check_modules(GTK REQUIRED IMPORTED_TARGET gtk+-3.0)
pkg_check_modules(GLIB REQUIRED IMPORTED_TARGET glib-2.0)
pkg_check_modules(GIO REQUIRED IMPORTED_TARGET gio-2.0)
set(FLUTTER_LIBRARY "${EPHEMERAL_DIR}/libflutter_linux_gtk.so")
# Published to parent scope for install step.
set(FLUTTER_LIBRARY ${FLUTTER_LIBRARY} PARENT_SCOPE)
set(FLUTTER_ICU_DATA_FILE "${EPHEMERAL_DIR}/icudtl.dat" PARENT_SCOPE)
set(PROJECT_BUILD_DIR "${PROJECT_DIR}/build/" PARENT_SCOPE)
set(AOT_LIBRARY "${PROJECT_DIR}/build/lib/libapp.so" PARENT_SCOPE)
list(APPEND FLUTTER_LIBRARY_HEADERS
"fl_basic_message_channel.h"
"fl_binary_codec.h"
"fl_binary_messenger.h"
"fl_dart_project.h"
"fl_engine.h"
"fl_json_message_codec.h"
"fl_json_method_codec.h"
"fl_message_codec.h"
"fl_method_call.h"
"fl_method_channel.h"
"fl_method_codec.h"
"fl_method_response.h"
"fl_plugin_registrar.h"
"fl_plugin_registry.h"
"fl_standard_message_codec.h"
"fl_standard_method_codec.h"
"fl_string_codec.h"
"fl_value.h"
"fl_view.h"
"flutter_linux.h"
)
list_prepend(FLUTTER_LIBRARY_HEADERS "${EPHEMERAL_DIR}/flutter_linux/")
add_library(flutter INTERFACE)
target_include_directories(flutter INTERFACE
"${EPHEMERAL_DIR}"
)
target_link_libraries(flutter INTERFACE "${FLUTTER_LIBRARY}")
target_link_libraries(flutter INTERFACE
PkgConfig::GTK
PkgConfig::GLIB
PkgConfig::GIO
)
add_dependencies(flutter flutter_assemble)
# === Flutter tool backend ===
# _phony_ is a non-existent file to force this command to run every time,
# since currently there's no way to get a full input/output list from the
# flutter tool.
add_custom_command(
OUTPUT ${FLUTTER_LIBRARY} ${FLUTTER_LIBRARY_HEADERS}
${CMAKE_CURRENT_BINARY_DIR}/_phony_
COMMAND ${CMAKE_COMMAND} -E env
${FLUTTER_TOOL_ENVIRONMENT}
"${FLUTTER_ROOT}/packages/flutter_tools/bin/tool_backend.sh"
${FLUTTER_TARGET_PLATFORM} ${CMAKE_BUILD_TYPE}
VERBATIM
)
add_custom_target(flutter_assemble DEPENDS
"${FLUTTER_LIBRARY}"
${FLUTTER_LIBRARY_HEADERS}
)
+6
View File
@@ -0,0 +1,6 @@
#include "my_application.h"
int main(int argc, char** argv) {
g_autoptr(MyApplication) app = my_application_new();
return g_application_run(G_APPLICATION(app), argc, argv);
}
+124
View File
@@ -0,0 +1,124 @@
#include "my_application.h"
#include <flutter_linux/flutter_linux.h>
#ifdef GDK_WINDOWING_X11
#include <gdk/gdkx.h>
#endif
#include "flutter/generated_plugin_registrant.h"
struct _MyApplication {
GtkApplication parent_instance;
char** dart_entrypoint_arguments;
};
G_DEFINE_TYPE(MyApplication, my_application, GTK_TYPE_APPLICATION)
// Implements GApplication::activate.
static void my_application_activate(GApplication* application) {
MyApplication* self = MY_APPLICATION(application);
GtkWindow* window =
GTK_WINDOW(gtk_application_window_new(GTK_APPLICATION(application)));
// Use a header bar when running in GNOME as this is the common style used
// by applications and is the setup most users will be using (e.g. Ubuntu
// desktop).
// If running on X and not using GNOME then just use a traditional title bar
// in case the window manager does more exotic layout, e.g. tiling.
// If running on Wayland assume the header bar will work (may need changing
// if future cases occur).
gboolean use_header_bar = TRUE;
#ifdef GDK_WINDOWING_X11
GdkScreen* screen = gtk_window_get_screen(window);
if (GDK_IS_X11_SCREEN(screen)) {
const gchar* wm_name = gdk_x11_screen_get_window_manager_name(screen);
if (g_strcmp0(wm_name, "GNOME Shell") != 0) {
use_header_bar = FALSE;
}
}
#endif
if (use_header_bar) {
GtkHeaderBar* header_bar = GTK_HEADER_BAR(gtk_header_bar_new());
gtk_widget_show(GTK_WIDGET(header_bar));
gtk_header_bar_set_title(header_bar, "Morris GC");
gtk_header_bar_set_show_close_button(header_bar, TRUE);
gtk_window_set_titlebar(window, GTK_WIDGET(header_bar));
} else {
gtk_window_set_title(window, "Morris GC");
}
gtk_window_set_default_size(window, 1280, 720);
gtk_widget_show(GTK_WIDGET(window));
g_autoptr(FlDartProject) project = fl_dart_project_new();
fl_dart_project_set_dart_entrypoint_arguments(project, self->dart_entrypoint_arguments);
FlView* view = fl_view_new(project);
gtk_widget_show(GTK_WIDGET(view));
gtk_container_add(GTK_CONTAINER(window), GTK_WIDGET(view));
fl_register_plugins(FL_PLUGIN_REGISTRY(view));
gtk_widget_grab_focus(GTK_WIDGET(view));
}
// Implements GApplication::local_command_line.
static gboolean my_application_local_command_line(GApplication* application, gchar*** arguments, int* exit_status) {
MyApplication* self = MY_APPLICATION(application);
// Strip out the first argument as it is the binary name.
self->dart_entrypoint_arguments = g_strdupv(*arguments + 1);
g_autoptr(GError) error = nullptr;
if (!g_application_register(application, nullptr, &error)) {
g_warning("Failed to register: %s", error->message);
*exit_status = 1;
return TRUE;
}
g_application_activate(application);
*exit_status = 0;
return TRUE;
}
// Implements GApplication::startup.
static void my_application_startup(GApplication* application) {
//MyApplication* self = MY_APPLICATION(object);
// Perform any actions required at application startup.
G_APPLICATION_CLASS(my_application_parent_class)->startup(application);
}
// Implements GApplication::shutdown.
static void my_application_shutdown(GApplication* application) {
//MyApplication* self = MY_APPLICATION(object);
// Perform any actions required at application shutdown.
G_APPLICATION_CLASS(my_application_parent_class)->shutdown(application);
}
// Implements GObject::dispose.
static void my_application_dispose(GObject* object) {
MyApplication* self = MY_APPLICATION(object);
g_clear_pointer(&self->dart_entrypoint_arguments, g_strfreev);
G_OBJECT_CLASS(my_application_parent_class)->dispose(object);
}
static void my_application_class_init(MyApplicationClass* klass) {
G_APPLICATION_CLASS(klass)->activate = my_application_activate;
G_APPLICATION_CLASS(klass)->local_command_line = my_application_local_command_line;
G_APPLICATION_CLASS(klass)->startup = my_application_startup;
G_APPLICATION_CLASS(klass)->shutdown = my_application_shutdown;
G_OBJECT_CLASS(klass)->dispose = my_application_dispose;
}
static void my_application_init(MyApplication* self) {}
MyApplication* my_application_new() {
return MY_APPLICATION(g_object_new(my_application_get_type(),
"application-id", APPLICATION_ID,
"flags", G_APPLICATION_NON_UNIQUE,
nullptr));
}
+18
View File
@@ -0,0 +1,18 @@
#ifndef FLUTTER_MY_APPLICATION_H_
#define FLUTTER_MY_APPLICATION_H_
#include <gtk/gtk.h>
G_DECLARE_FINAL_TYPE(MyApplication, my_application, MY, APPLICATION,
GtkApplication)
/**
* my_application_new:
*
* Creates a new Flutter-based application.
*
* Returns: a new #MyApplication.
*/
MyApplication* my_application_new();
#endif // FLUTTER_MY_APPLICATION_H_
@@ -5,10 +5,10 @@
// 'flutter create' template.
// The application's name. By default this is also the title of the Flutter window.
PRODUCT_NAME = gc_ui
PRODUCT_NAME = GC-UI
// The application's bundle identifier
PRODUCT_BUNDLE_IDENTIFIER = com.morris.gc.gcUi
// The copyright displayed in application information
PRODUCT_COPYRIGHT = Copyright © 2026 com.morris.gc. All rights reserved.
PRODUCT_COPYRIGHT = Copyright © 2026 Morris. All rights reserved.
+1 -1
View File
@@ -4,7 +4,7 @@ project(gc_ui LANGUAGES CXX)
# The name of the executable created for the application. Change this to change
# the on-disk name of your application.
set(BINARY_NAME "gc_ui")
set(BINARY_NAME "GC-UI")
# Explicitly opt in to modern CMake behaviors to avoid warnings with recent
# versions of CMake.
+6 -6
View File
@@ -89,13 +89,13 @@ BEGIN
BEGIN
BLOCK "040904e4"
BEGIN
VALUE "CompanyName", "com.morris.gc" "\0"
VALUE "FileDescription", "gc_ui" "\0"
VALUE "CompanyName", "Morris" "\0"
VALUE "FileDescription", "GC UI" "\0"
VALUE "FileVersion", VERSION_AS_STRING "\0"
VALUE "InternalName", "gc_ui" "\0"
VALUE "LegalCopyright", "Copyright (C) 2026 com.morris.gc. All rights reserved." "\0"
VALUE "OriginalFilename", "gc_ui.exe" "\0"
VALUE "ProductName", "gc_ui" "\0"
VALUE "InternalName", "GC-UI" "\0"
VALUE "LegalCopyright", "Copyright (C) 2026 Morris. All rights reserved." "\0"
VALUE "OriginalFilename", "GC-UI.exe" "\0"
VALUE "ProductName", "Morris GC" "\0"
VALUE "ProductVersion", VERSION_AS_STRING "\0"
END
END
+1 -1
View File
@@ -27,7 +27,7 @@ int APIENTRY wWinMain(_In_ HINSTANCE instance, _In_opt_ HINSTANCE prev,
FlutterWindow window(project);
Win32Window::Point origin(10, 10);
Win32Window::Size size(1280, 720);
if (!window.Create(L"gc_ui", origin, size)) {
if (!window.Create(L"Morris GC", origin, size)) {
return EXIT_FAILURE;
}
window.SetQuitOnClose(true);
+11 -2
View File
@@ -20,12 +20,21 @@ public static class SignatureKeyring
private static readonly List<KeyEntry> KeysInternal = new()
{
// 生产密钥(2026-11 生成)。指纹 b41b1dd6259ea9ed
// 生产密钥(2026-12 换发)。指纹 ee6083be47a87907
// 上一代 gc-2026-11 的私钥没有留存,无法再签出可通过校验的清单,
// 因此新增这一把;旧公钥保留一个版本周期,方便过渡期排查。
new KeyEntry(
"gc-2026-12",
"MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAE4R+R2Pvinsu/xdaUu5mATPyYoEpL6" +
"cyugSVKAVMz6yY15SjkgEvdosfWuQJBbrPOOgGulE6Jht6v7FZx1dQguQ==",
"GC 主发布密钥"),
// 已停用(私钥遗失):保留仅为兼容历史诊断输出,不能用于验签新清单。
new KeyEntry(
"gc-2026-11",
"MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEny5YKVBZUzOyRcSiuutlGmBb4+xm" +
"PrNDGshilBlpmFyWu5Atq+FGP2tn+8Or8V7OH+/7lhCmXu8jZuC5/5CWSw==",
"GC 主发布密钥")
"已停用:私钥遗失")
};
static SignatureKeyring() => LoadFromEnvironment();
+3 -1
View File
@@ -310,8 +310,10 @@ internal static class Program
/// <summary>序列化清单并用私钥签名(测试里模拟一次正式发布)。</summary>
private static void WriteSigned(string path, RepoVersion version, ECDsa key)
{
// keyId 必须与 .signing/ 里的私钥对应的公钥条目一致,否则客户端按 keyId
// 查不到受信任公钥,会判成 Invalid 而不是 Verified。
var text = JsonSerializer.Serialize(version, Json.Options) + "\n";
File.WriteAllText(path, ManifestSignature.SignDocument(text, key, "gc-2026-11"));
File.WriteAllText(path, ManifestSignature.SignDocument(text, key, "gc-2026-12"));
}
private static void CopyTree(string src, string dst)
+14 -3
View File
@@ -135,12 +135,23 @@ Windows 用 `.\build.ps1`,参数相同(`build / check / models / stamp / run
### 签名密钥
- 私钥:`.signing/gc-signing.pem`(**已在 `.gitignore`,永不入库**;请自行备份)
- 公钥:硬编码在 `GC/src/Security/SignatureKeyring.cs`,指纹 `b41b1dd6259ea9ed`
- 生成新密钥:`dotnet run --project GC-SAVEDOG -- keygen`
- 轮换:把新公钥追加进 `SignatureKeyring.Keys`(保留旧公钥一个版本周期),再重新签名清单
- 公钥:硬编码在 `GC/src/Security/SignatureKeyring.cs`
- 当前生效:`gc-2026-12`,指纹 `ee6083be47a87907`
- 已停用:`gc-2026-11`,指纹 `b41b1dd6259ea9ed`(私钥遗失,仅保留占位)
- 生成新密钥:`dotnet run --project GC-SAVEDOG -- keygen --key-id gc-YYYY-MM`
- 轮换:把新公钥追加进 `SignatureKeyring.Keys`(保留旧公钥一个版本周期),
同时把 `GC_SIGNING_KEY_ID`(默认值在 `buildsh/lib/build_funcs.sh`)改成新 keyId,
再重新签名清单
- 部署前核对两边公钥一致:
`dotnet run --project GC-SAVEDOG -- verify --manifest version.json`
`build.sh` 在刷新清单后自动调用 `sign_manifest` 签名并同步 `model/version.json`;
`.signing/gc-signing.pem` 不存在时只告警,清单不带签名(客户端会拒绝更新)。
> 换钥匙的代价:老客户端只认识编译进去的那份公钥,所以**用新密钥签出的清单
> 在旧版本上会判成「签名无效」**。密钥一旦丢失,只能靠发一个新版本把新公钥带出去,
> 中间这段时间老客户端无法自动更新 —— 私钥务必备份两处以上。
### zip 解压加固
更新包和模型源 zip 一律当成不可信输入:拒绝 `../`、绝对路径、盘符、UNC、符号链接;
+3 -1
View File
@@ -3,6 +3,7 @@
# GC 构建入口(薄封装)
#
# ./build.sh build 完整发布(原 publish),带 apt 风格进度条
# 默认要求每个平台都带 Flutter 前端;--allow-no-ui 允许降级
# ./build.sh check 验证:编译 + 自检 + 离屏渲染 + 产物
# ./build.sh models 编译模型 dll + 封面 + 版本戳
# ./build.sh stamp 重新生成 version.json
@@ -33,11 +34,12 @@ VERSION=$(sed -n 's/.*<Version>\(.*\)<\/Version>.*/\1/p' Directory.Build.props |
TASK="${1:-build}"
shift 2>/dev/null || true
# 解析 -version=<版本号>(也接受 --version=)
# 解析 -version=<版本号>(也接受 --version=)与 --allow-no-ui
CLI_VERSION=""
for arg in "$@"; do
case "$arg" in
-version=*|--version=*) CLI_VERSION="${arg#*=}" ;;
-allow-no-ui|--allow-no-ui) export GC_ALLOW_NO_UI=1 ;;
esac
done
if [ -n "$CLI_VERSION" ]; then
+1 -1
View File
@@ -275,7 +275,7 @@ function New-MacAppBundle {
<plist version="1.0"><dict>
<key>CFBundleName</key><string>GC</string>
<key>CFBundleDisplayName</key><string>GC</string>
<key>CFBundleIdentifier</key><string>cn.neorf.GC</string>
<key>CFBundleIdentifier</key><string>com.xhmcl.GC</string>
<key>CFBundleVersion</key><string>$script:BuildVersion</string>
<key>CFBundleShortVersionString</key><string>$script:BuildVersion</string>
<key>CFBundlePackageType</key><string>APPL</string>
+77 -7
View File
@@ -1,13 +1,41 @@
#!/bin/sh
# buildsh/build.sh —— 完整发布(原 publish)
# 步骤及权重按实测耗时设定,供进度条估算总进度与剩余时间:
# 清理(2) 版本(3) Mac(35) WinX64(25) WinArm(25) 骨架(3) 打包(5) 收尾(2) = 100
#
# 目标平台按构建主机决定,每条产物都带 Flutter 前端:
# macOS 主机 : mac-arm64(原生)+ win-amd64 / win-arm64(mingw 交叉)
# Linux 主机 : linux-amd64(原生)+ win-amd64 / win-arm64(mingw 交叉)
# Windows 主机: win-amd64 / win-arm64(原生)
#
# 前端是默认必需项:flutter 缺失或编译失败一律中断,不再悄悄产出只带 Avalonia
# 回退界面的包。确实要降级时用 ./build.sh build --allow-no-ui。
#
# 进度权重按实测耗时设定,供进度条估算总进度与剩余时间。
bs_build() {
ROOT_DIR="$1"
: "${APP_PROJ:?}" "${SLN:?}" "${VERSION:?}"
progress_init 100 2 3 35 25 25 3 5 2
HOST=$(uname -s)
BUILD_MAC=0
BUILD_LINUX=0
case "$HOST" in
Darwin) BUILD_MAC=1 ;;
MINGW*|MSYS*|CYGWIN*) : ;; # Windows 主机只能编 Windows
*) BUILD_LINUX=1 ;;
esac
# 显式降级:允许在没有该平台 Flutter 宿主的情况下仍出 Avalonia 版包
ALLOW_NO_UI="${GC_ALLOW_NO_UI:-0}"
# 权重:清理 版本 Mac WinX64 WinArm64 Linux 前端 骨架 打包 收尾
WEIGHTS="2 3"
[ "$BUILD_MAC" = 1 ] && WEIGHTS="$WEIGHTS 35"
WEIGHTS="$WEIGHTS 25 25"
[ "$BUILD_LINUX" = 1 ] && WEIGHTS="$WEIGHTS 30"
WEIGHTS="$WEIGHTS 25 3 5 2"
TOTAL=0
for _w in $WEIGHTS; do TOTAL=$((TOTAL + _w)); done
progress_init "$TOTAL" $WEIGHTS
progress_step "清理旧产物"; progress_tick 100
rm -rf "$ROOT_DIR/dist"; mkdir -p "$ROOT_DIR/dist"
@@ -37,20 +65,62 @@ bs_build() {
progress_tick 100
}
progress_step "编译 Mac"
_run_publish mac 90 publish_rid "osx-arm64" "dist/mac-arm64" false || return 1
if [ "$BUILD_MAC" = 1 ]; then
progress_step "编译 Mac"
_run_publish mac 90 publish_rid "osx-arm64" "dist/mac-arm64" false || return 1
publish_backend "osx-arm64" "dist/mac-arm64" || return 1
# Flutter 的 macOS 产物必须用 Xcode 在本机编,Linux 上无法替代
build_flutter_ui macos "dist/mac-arm64" || {
echo "!! macOS 前端编译失败。macOS 版 Flutter 只能在 macOS 上编。"
return 1
}
elif [ "$ALLOW_NO_UI" = 1 ]; then
progress_step "编译 Mac"
_run_publish mac 90 publish_rid "osx-arm64" "dist/mac-arm64" false || return 1
publish_backend "osx-arm64" "dist/mac-arm64" || return 1
echo "!! --allow-no-ui:macOS 包内不含 Flutter 前端,启动器将回退 Avalonia"
fi
progress_step "编译 Win-x64"
_run_publish winx64 70 publish_rid "win-x64" "dist/win-amd64" true || return 1
publish_backend "win-x64" "dist/win-amd64" || return 1
progress_step "编译 Win-arm64"
_run_publish winarm 70 publish_rid "win-arm64" "dist/win-arm64" true || return 1
publish_backend "win-arm64" "dist/win-arm64" || return 1
if [ "$BUILD_LINUX" = 1 ]; then
progress_step "编译 Linux"
_run_publish linux 70 publish_rid "linux-x64" "dist/linux-amd64" false || return 1
publish_backend "linux-x64" "dist/linux-amd64" || return 1
build_flutter_ui linux "dist/linux-amd64" || return 1
fi
# Windows 前端:Windows 主机走官方 toolchain;Linux/macOS 主机用 mingw-w64 +
# wine 交叉编译(buildsh/cross)。只产出 x64 一份,两个包共用,
# ARM64 上由系统模拟 x64 进程运行前端。
progress_step "编译 Win 前端"
case "$HOST" in
MINGW*|MSYS*|CYGWIN*) build_flutter_ui windows "dist/win-flutter" || return 1 ;;
*) build_flutter_ui_cross "dist/win-flutter" || return 1 ;;
esac
for label in win-amd64 win-arm64; do
cp -R "$ROOT_DIR/dist/win-flutter/." "$ROOT_DIR/dist/$label/"
done
rm -rf "$ROOT_DIR/dist/win-flutter"
progress_step "运行骨架"; progress_tick 100
package_mac_app
if [ -d "$ROOT_DIR/dist/mac-arm64" ]; then
package_mac_app
fi
prepare_runtime_layout "dist/win-amd64"
prepare_runtime_layout "dist/win-arm64"
prepare_runtime_layout "dist/mac-arm64/GC.app/Contents/MacOS"
if [ "$BUILD_LINUX" = 1 ]; then
prepare_runtime_layout "dist/linux-amd64"
fi
if [ -d "$ROOT_DIR/dist/mac-arm64/GC.app/Contents/MacOS" ]; then
prepare_runtime_layout "dist/mac-arm64/GC.app/Contents/MacOS"
fi
progress_step "打包 zip"; progress_tick 100
pack_launcher
+108
View File
@@ -0,0 +1,108 @@
cmake_minimum_required(VERSION 3.14)
# 交叉编译 Flutter Windows 桌面外壳。
#
# 只编译 C++ 层:runner(Win32 窗口)+ cpp_client_wrapper(Dart 互操作)。
# Dart 侧的 flutter_assets 由 flutter assemble 单独产出,最后与
# flutter_windows.dll 一起摆进同一个目录就是完整的可运行包。
#
# 与 windows/CMakeLists.txt 的区别:不调用 tool_backend.bat(它在非 Windows
# 上不可执行),也不依赖 Visual Studio 生成器。
project(gc_ui_cross LANGUAGES CXX RC)
get_filename_component(APP_DIR "${CMAKE_CURRENT_LIST_DIR}/../../GC-UI/frontend" ABSOLUTE)
set(WIN_DIR "${APP_DIR}/windows")
set(RUN_DIR "${WIN_DIR}/runner")
set(EPHEMERAL "${WIN_DIR}/flutter/ephemeral")
set(WRAPPER "${EPHEMERAL}/cpp_client_wrapper")
set(DLL_LIB "${EPHEMERAL}/flutter_windows.dll.lib")
foreach(required
"${EPHEMERAL}/flutter_windows.dll"
"${DLL_LIB}"
"${WRAPPER}/core_implementations.cc")
if(NOT EXISTS "${required}")
message(FATAL_ERROR
"缺少 Flutter Windows 引擎产物:${required}\n"
"先运行 buildsh/cross/build-ui-win-cross.sh 里的 fetch_engine 步骤。")
endif()
endforeach()
set(FLUTTER_VERSION "1.0.0" CACHE STRING "写入 exe 版本资源")
# windres 在非 Windows 主机上不按 rc 文件所在目录解析图标路径,
# 这里把 resources\\app_icon.ico 换成绝对路径再交给 windres。
# 注意只替换这一处:rc 里其它 "\0" 是字符串转义,不能动。
file(READ "${RUN_DIR}/Runner.rc" _rc_text)
string(REPLACE "resources\\\\app_icon.ico" "${RUN_DIR}/resources/app_icon.ico" _rc_text "${_rc_text}")
# windres 收到 -DFLUTTER_VERSION=\"1.0.0\" 时会把反斜杠留在宏值里,展开成非法 token。
# 直接把宏定义成字面量,绕开命令行转义。
string(REPLACE "#define VERSION_AS_STRING FLUTTER_VERSION"
"#define VERSION_AS_STRING \"${FLUTTER_VERSION}\""
_rc_text "${_rc_text}")
file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/Runner.cross.rc" "${_rc_text}")
add_executable(${BINARY_NAME} WIN32
"${RUN_DIR}/main.cpp"
"${RUN_DIR}/flutter_window.cpp"
"${RUN_DIR}/utils.cpp"
"${RUN_DIR}/win32_window.cpp"
"${WIN_DIR}/flutter/generated_plugin_registrant.cc"
"${WRAPPER}/core_implementations.cc"
"${WRAPPER}/standard_codec.cc"
"${WRAPPER}/plugin_registrar.cc"
"${WRAPPER}/flutter_engine.cc"
"${WRAPPER}/flutter_view_controller.cc"
"${CMAKE_CURRENT_BINARY_DIR}/Runner.cross.rc"
)
target_include_directories(${BINARY_NAME} PRIVATE
"${RUN_DIR}"
"${WIN_DIR}"
"${EPHEMERAL}"
"${EPHEMERAL}/include"
"${WRAPPER}/include"
)
target_compile_features(${BINARY_NAME} PRIVATE cxx_std_17)
# Flutter 的 C++ wrapper 需要 RTTI 与异常;线程安全相关的锁依赖 posix 线程模型。
target_compile_options(${BINARY_NAME} PRIVATE
-fexceptions
-frtti
-Wall
-Wno-unused-parameter
-Wno-missing-field-initializers
)
# Runner.rc 里的 #include "resource.h" / runner.exe.manifest 都是相对路径,
# windres 不按源文件目录解析,必须显式给 -I。
set_source_files_properties("${RUN_DIR}/Runner.rc" PROPERTIES
COMPILE_FLAGS "-I\"${RUN_DIR}\"")
target_compile_definitions(${BINARY_NAME} PRIVATE
"FLUTTER_VERSION=\"${FLUTTER_VERSION}\""
"FLUTTER_VERSION_MAJOR=${FLUTTER_VERSION_MAJOR}"
"FLUTTER_VERSION_MINOR=${FLUTTER_VERSION_MINOR}"
"FLUTTER_VERSION_PATCH=${FLUTTER_VERSION_PATCH}"
"FLUTTER_VERSION_BUILD=${FLUTTER_VERSION_BUILD}"
"NOMINMAX"
)
target_link_libraries(${BINARY_NAME} PRIVATE
"${DLL_LIB}"
dwmapi
ole32
uuid
)
# runner 的入口是 wWinMain(宽字符版);MSVC 自动处理,mingw 需要 -municode
# 才会链接 wWinMainCRTStartup,否则报 undefined reference to `WinMain'。
target_link_options(${BINARY_NAME} PRIVATE -municode)
set_target_properties(${BINARY_NAME} PROPERTIES
OUTPUT_NAME "GC-UI"
SUFFIX ".exe"
)
+221
View File
@@ -0,0 +1,221 @@
#!/usr/bin/env bash
#
# 在 Linux / macOS 上交叉编译 Flutter Windows 桌面界面(GC-UI)。
#
# ./buildsh/cross/build-ui-win-cross.sh [输出目录]
#
# 产物目录是可直接拷到 Windows 上运行的一整套:
# GC-UI.exe flutter_windows.dll data/{icudtl.dat,app.so,flutter_assets/}
#
# 原理:
# Flutter 的 Windows 外壳(runner + cpp_client_wrapper)是纯 Win32 + 标准 C++,
# 只通过 C ABI 调 flutter_windows.dll,所以 mingw-w64 就能编译。
# 唯一的 Windows 专属步骤是 AOT 快照生成(gen_snapshot.exe 是 PE 文件),
# 用 wine 执行即可,全流程不需要 Windows 机器或 MSVC。
#
# 依赖:
# Linux sudo apt install mingw-w64 cmake ninja-build wine unzip curl
# macOS brew install mingw-w64 cmake ninja && brew install --cask wine-stable
#
# 环境变量:
# FLUTTER_BIN flutter 可执行文件(默认 PATH 中的 flutter,要求 3.24+)
# WIN_ENGINE_MIRROR 引擎产物来源(默认官方 GCS,国内可换 storage.flutter-io.cn)
#
set -euo pipefail
ROOT_DIR=$(cd "$(dirname "$0")/../.." && pwd)
UI_DIR="$ROOT_DIR/GC-UI/frontend"
OUT_DIR="${1:-$UI_DIR/build/windows/x64/runner/Release}"
BUILD_DIR="$UI_DIR/build/windows/x64/cross"
say() { printf '\033[36m==>\033[0m %s\n' "$*"; }
warn() { printf '\033[33m!!\033[0m %s\n' "$*"; }
die() { printf '\033[31mxx\033[0m %s\n' "$*" >&2; exit 1; }
need() { command -v "$1" >/dev/null 2>&1 || die "缺少 $1($2)"; }
# ---------------------------------------------------------------- 工具链
MINGW_CXX=""
check_toolchain() {
need cmake "Linux: apt install cmake;macOS: brew install cmake"
need ninja "Linux: apt install ninja-build;macOS: brew install ninja"
need unzip "Linux: apt install unzip"
need curl "Linux: apt install curl"
for c in x86_64-w64-mingw32-g++-posix x86_64-w64-mingw32-g++; do
if command -v "$c" >/dev/null 2>&1; then MINGW_CXX="$c"; break; fi
done
[ -n "$MINGW_CXX" ] || die "缺少 mingw-w64 C++ 编译器
Linux: sudo apt install g++-mingw-w64-x86-64-posix
macOS: brew install mingw-w64"
command -v x86_64-w64-mingw32-windres >/dev/null 2>&1 || die "缺少 mingw-w64 资源编译器"
# gen_snapshot.exe 靠 wine 执行;没有 wine 就只能出 debug 版(JIT)
if command -v wine >/dev/null 2>&1 || command -v wine64 >/dev/null 2>&1; then
WINE_BIN=$(command -v wine 2>/dev/null || command -v wine64)
else
die "缺少 wine(AOT 快照需要执行 Windows 版 gen_snapshot.exe)
Linux: sudo apt install wine
macOS: brew install --cask wine-stable"
fi
}
# ---------------------------------------------------------------- Flutter
resolve_flutter() {
FLUTTER_BIN="${FLUTTER_BIN:-flutter}"
command -v "$FLUTTER_BIN" >/dev/null 2>&1 || die "未找到 flutter,可设置 FLUTTER_BIN=/path/to/flutter"
local bin_path root target
bin_path=$(command -v "$FLUTTER_BIN")
while [ -L "$bin_path" ]; do
target=$(readlink "$bin_path")
case "$target" in
/*) bin_path="$target" ;;
*) bin_path="$(cd "$(dirname "$bin_path")" && pwd)/$target" ;;
esac
done
root=$(cd "$(dirname "$bin_path")/.." && pwd)
[ -f "$root/bin/internal/engine.version" ] || die "$root 不像 Flutter SDK 根目录"
FLUTTER_ROOT="$root"
ENGINE_DIR="$root/bin/cache/artifacts/engine"
ENGINE_HASH=$(tr -d '[:space:]' < "$root/bin/internal/engine.version")
# pubspec 要求 Dart 3.5+(Flutter 3.24+),版本不对直接提醒
local dart_ver
dart_ver=$("$root/bin/cache/dart-sdk/bin/dart" --version 2>/dev/null | grep -oE '[0-9]+\.[0-9]+\.[0-9]+' | head -1) || dart_ver=""
say "Flutter SDK: $root(engine ${ENGINE_HASH:0:10}${dart_ver:+, dart $dart_ver})"
}
# ---------------------------------------------------------------- 引擎产物
ENGINE_DIR="" # 由 resolve_flutter 填充
fetch_engine() {
local base="$MIRROR/flutter/$ENGINE_HASH"
local cache="${TMPDIR:-/tmp}/gc-win-engine"
mkdir -p "$cache"
# 每个条目:远端相对路径 | 落地目录 | 落地后的标志文件
local -a items=(
"windows-x64-release/windows-x64-flutter.zip|$ENGINE_DIR/windows-x64-release|flutter_windows.dll.lib"
"windows-x64/artifacts.zip|$ENGINE_DIR/windows-x64|frontend_server_aot.dart.snapshot"
"windows-x64/flutter-cpp-client-wrapper.zip|$ENGINE_DIR/windows-x64/cpp_client_wrapper|core_implementations.cc"
)
local item remote dest marker zip
for item in "${items[@]}"; do
IFS='|' read -r remote dest marker <<<"$item"
[ -f "$dest/$marker" ] && continue
zip="$cache/$(echo "$remote" | tr '/' '_')"
if [ ! -s "$zip" ]; then
say "下载 $(basename "$remote")"
curl -fL --retry 3 --retry-delay 2 -o "$zip.part" "$base/$remote" \
|| die "下载失败:$base/$remote
可设置 WIN_ENGINE_MIRROR=https://storage.flutter-io.cn/flutter_infra_release 走国内镜像"
mv "$zip.part" "$zip"
fi
mkdir -p "$dest"
unzip -oq "$zip" -d "$dest"
done
install_gen_snapshot_shim
}
# flutter_tools 会直接 exec $ENGINE_DIR/*/gen_snapshot(无 .exe 后缀)。
# 这里放一个调用 wine 的同名脚本,并给原本的 exe 加上 .win 后缀避免混淆。
install_gen_snapshot_shim() {
local dirs=("$ENGINE_DIR/windows-x64-release" "$ENGINE_DIR/windows-x64")
local dir shim
for dir in "${dirs[@]}"; do
[ -f "$dir/gen_snapshot.exe" ] || continue
[ -f "$dir/gen_snapshot.exe.win" ] || mv "$dir/gen_snapshot.exe" "$dir/gen_snapshot.exe.win"
shim="$dir/gen_snapshot"
cat > "$shim" <<EOF
#!/bin/sh
# 由 buildsh/cross/build-ui-win-cross.sh 生成:用 wine 执行 Windows 版 gen_snapshot。
export WINEPREFIX="\${WINEPREFIX:-\$HOME/.wine64}"
export WINEDEBUG=-all
exec "$WINE_BIN" "$dir/gen_snapshot.exe.win" "\$@"
EOF
chmod +x "$shim"
done
}
# ---------------------------------------------------------------- 构建
build_assets_and_aot() {
say "生成 Dart 资源与 AOT 快照"
( cd "$UI_DIR" && "$FLUTTER_BIN" --no-version-check --suppress-analytics pub get >/dev/null )
local dart="$FLUTTER_ROOT/bin/cache/dart-sdk/bin/dart"
local tool="$FLUTTER_ROOT/packages/flutter_tools/bin/tool_backend.dart"
# tool_backend 是官方 CMake 调用的同一入口:解包引擎产物到 ephemeral、
# 生成 flutter_assets、aot_elf_release。它末尾的收尾步骤在非 Windows host
# 上可能非零退出,所以只校验产物是否齐备。
( cd "$UI_DIR" && \
FLUTTER_ROOT="$FLUTTER_ROOT" \
PROJECT_DIR="$UI_DIR" \
FLUTTER_STORAGE_BASE_URL="${FLUTTER_STORAGE_BASE_URL:-$MIRROR}" \
"$dart" "$tool" windows-x64 release ) || true
[ -f "$UI_DIR/build/windows/app.so" ] || die "AOT 快照未生成(wine 执行 gen_snapshot 失败?)"
[ -d "$UI_DIR/build/flutter_assets" ] || die "flutter_assets 未生成"
say "AOT 快照 $(du -h "$UI_DIR/build/windows/app.so" | cut -f1),资源 $(du -sh "$UI_DIR/build/flutter_assets" | cut -f1)"
}
build_cpp() {
local ver major minor patch build_no
read -r major minor patch build_no <<<"$(sed -n 's/^version:[[:space:]]*//p' "$UI_DIR/pubspec.yaml" \
| head -1 | awk -F'[.+]' '{print $1+0, $2+0, $3+0, ($4==""?0:$4+0)}')"
ver="${major}.${minor}.${patch}"
say "编译 C++ 外壳($(basename "$MINGW_CXX"))"
cmake -S "$ROOT_DIR/buildsh/cross" -B "$BUILD_DIR" -G Ninja \
-DCMAKE_TOOLCHAIN_FILE="$ROOT_DIR/buildsh/cross/toolchain-mingw.cmake" \
-DCMAKE_BUILD_TYPE=Release \
-DBINARY_NAME=GC-UI \
-DFLUTTER_VERSION="$ver" \
-DFLUTTER_VERSION_MAJOR="$major" \
-DFLUTTER_VERSION_MINOR="$minor" \
-DFLUTTER_VERSION_PATCH="$patch" \
-DFLUTTER_VERSION_BUILD="$build_no" >/dev/null
cmake --build "$BUILD_DIR" -- -j "$(getconf _NPROCESSORS_ONLN 2>/dev/null || echo 4)" \
|| die "C++ 编译失败"
[ -f "$BUILD_DIR/GC-UI.exe" ] || die "未产出 GC-UI.exe"
}
stage() {
local eph="$UI_DIR/windows/flutter/ephemeral"
say "组装到 $OUT_DIR"
rm -rf "$OUT_DIR"
mkdir -p "$OUT_DIR/data"
cp "$BUILD_DIR/GC-UI.exe" "$OUT_DIR/"
cp "$eph/flutter_windows.dll" "$OUT_DIR/"
cp "$eph/icudtl.dat" "$OUT_DIR/data/"
cp "$UI_DIR/build/windows/app.so" "$OUT_DIR/data/"
cp -R "$UI_DIR/build/flutter_assets/." "$OUT_DIR/data/flutter_assets/"
say "完成:$(du -sh "$OUT_DIR" | cut -f1)"
find "$OUT_DIR" -maxdepth 2 -mindepth 1 | sed "s|$OUT_DIR| .|"
}
# ---------------------------------------------------------------- main
MIRROR="${WIN_ENGINE_MIRROR:-https://storage.googleapis.com/flutter_infra_release}"
check_toolchain
resolve_flutter
fetch_engine
build_assets_and_aot
build_cpp
stage
+36
View File
@@ -0,0 +1,36 @@
# 在 Linux / macOS 上交叉编译 Flutter Windows 桌面应用的 CMake 工具链。
#
# 原理:Flutter 的 Windows 嵌入层(windows/runner/*.cpp + cpp_client_wrapper)
# 是纯 Win32 + 标准 C++,只通过 C ABI 调用 flutter_windows.dll。因此用
# mingw-w64(GCC,posix 线程模型)即可产出与官方 toolchain 等价的 PE 产物,
# 不需要 Windows 机器,也不需要 MSVC。
#
# 用法:
# cmake -B build -G Ninja -DCMAKE_TOOLCHAIN_FILE=.../toolchain-mingw.cmake ...
set(CMAKE_SYSTEM_NAME Windows)
set(CMAKE_SYSTEM_VERSION 10.0)
set(CMAKE_SYSTEM_PROCESSOR x86_64)
set(MINGW_PREFIX "x86_64-w64-mingw32" CACHE STRING "目标三元组前缀")
# 必须用 posix 线程模型:Flutter 的 C++ wrapper 依赖 std::mutex / std::thread,
# win32 线程模型下的 libstdc++ 不提供这些类型。
find_program(MINGW_C NAMES ${MINGW_PREFIX}-gcc-posix ${MINGW_PREFIX}-gcc REQUIRED)
find_program(MINGW_CXX NAMES ${MINGW_PREFIX}-g++-posix ${MINGW_PREFIX}-g++ REQUIRED)
find_program(MINGW_RC NAMES ${MINGW_PREFIX}-windres REQUIRED)
set(CMAKE_C_COMPILER "${MINGW_C}")
set(CMAKE_CXX_COMPILER "${MINGW_CXX}")
set(CMAKE_RC_COMPILER "${MINGW_RC}")
set(CMAKE_FIND_ROOT_PATH "/usr/${MINGW_PREFIX}")
set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY)
# 静态链接 libgcc / libstdc++ / winpthread,产物只依赖 flutter_windows.dll
# 和系统 DLL,拷到干净机器上也能跑。
set(CMAKE_CXX_FLAGS_INIT "-DUNICODE -D_UNICODE -DNOMINMAX -D_HAS_EXCEPTIONS=1")
set(CMAKE_EXE_LINKER_FLAGS_INIT "-static -static-libgcc -static-libstdc++")
+127 -11
View File
@@ -24,7 +24,7 @@ stamp_launcher_only() {
# 没有私钥时只警告:清单不带 signature,客户端会按「未签名」处理。
sign_manifest() {
KEY="$ROOT_DIR/.signing/gc-signing.pem"
KEYID="${GC_SIGNING_KEY_ID:-gc-2026-11}"
KEYID="${GC_SIGNING_KEY_ID:-gc-2026-12}"
if [ ! -f "$KEY" ]; then
echo "!! 未找到签名私钥 ${KEY},本次 version.json 未签名(客户端会拒绝更新)"
echo " 生成密钥:dotnet run --project GC-SAVEDOG -- keygen"
@@ -94,7 +94,7 @@ TXT
"memoryMb": 2048,
"autoUpdateOnStartup": true,
"requireSignedManifest": true,
"updateRepository": "https://gitcode.com/Morris_1/GC",
"updateRepository": "https://git.xhmcl.com/Morris/GC",
"updateManifestUrl": "",
"updateLocalRoot": "",
"installedModelVersions": {},
@@ -174,36 +174,152 @@ pack_models() {
# macOS: .app 必须打成 zip 才能作为单文件分发;文件名用 .app.zip,
# 这样 macOS 双击会用归档工具解压出可运行的 .app。
# 若直接命名 .app,系统会把 zip 当成应用包解析 => 报「已损坏/打不开」。
# 发布本地 UI 后端(GC.UI.Server)。启动器会拉起它并等待 /api/health,
# 模型窗口也由它承载,所以必须和启动器放在同一目录。
publish_backend() {
RID="$1"; OUT="$2"
echo "==> 编译 UI 后端 (${RID}) -> ${OUT}"
dotnet publish "$ROOT_DIR/GC-UI/backend/GC.UI.Server/GC.UI.Server.csproj" \
-c Release \
-r "$RID" \
--self-contained true \
-p:Version="$VERSION" \
-p:DebugType=none \
-p:PublishSingleFile=false \
-p:PublishTrimmed=false \
-o "$ROOT_DIR/$OUT" || return 1
}
# 当前主机原生构建 Flutter 前端(Windows 主机编 Windows,macOS 主机编 macOS,
# Linux 主机编 Linux)。跨平台的 Windows 版由 build_flutter_ui_cross 负责。
#
# 默认「必须有前端」:缺 flutter 或编译失败直接返回非 0,让 build.sh 停下来说明
# 原因,而不是悄悄出一个只有 Avalonia 回退界面的包。确实需要降级时用
# ./build.sh build --allow-no-ui 显式声明。
build_flutter_ui() {
PLAT="$1"; DEST="$2"
UI_SRC="$ROOT_DIR/GC-UI/frontend"
if [ ! -d "$UI_SRC" ]; then
echo "!! 找不到 Flutter 工程:$UI_SRC"
return 1
fi
FLUTTER_BIN="${FLUTTER_BIN:-flutter}"
if ! command -v "$FLUTTER_BIN" >/dev/null 2>&1; then
echo "!! 未找到 flutter(可用 FLUTTER_BIN=<路径> 指定)"
return 1
fi
echo "==> 构建 Flutter 前端 (${PLAT})"
( cd "$UI_SRC" && "$FLUTTER_BIN" pub get && "$FLUTTER_BIN" build "$PLAT" --release ) || return 1
mkdir -p "$ROOT_DIR/$DEST"
case "$PLAT" in
windows)
# Release/ 里含 GC-UI.exe、flutter_windows.dll 和 data/
cp -R "$UI_SRC/build/windows/x64/runner/Release/." "$ROOT_DIR/$DEST/"
;;
macos)
rm -rf "$ROOT_DIR/$DEST/GC-UI.app"
cp -R "$UI_SRC/build/macos/Build/Products/Release/GC-UI.app" "$ROOT_DIR/$DEST/"
;;
linux)
# bundle/ 里是 GC-UI、lib/*.so 与 data/,整体铺到包的根目录
cp -R "$UI_SRC/build/linux/x64/release/bundle/." "$ROOT_DIR/$DEST/"
;;
*)
echo "!! 不支持的 Flutter 目标平台:$PLAT"
return 1
;;
esac
echo " -> $DEST(Flutter ${PLAT})"
}
# 在 Linux / macOS 上交叉编译 Windows 前端:mingw-w64 编 C++ 外壳,
# wine 跑 Windows 版 gen_snapshot 生成 AOT 快照,无需 Windows 机器。
# 产物布局与官方 toolchain 完全一致(GC-UI.exe + flutter_windows.dll + data/)。
build_flutter_ui_cross() {
DEST="$1"
UI_SRC="$ROOT_DIR/GC-UI/frontend"
[ -d "$UI_SRC" ] || return 0
FLUTTER_BIN="${FLUTTER_BIN:-flutter}"
if ! command -v "$FLUTTER_BIN" >/dev/null 2>&1; then
echo "!! 未找到 flutter(可用 FLUTTER_BIN=<路径> 指定)"
return 1
fi
mkdir -p "$ROOT_DIR/build/logs"
echo "==> 交叉编译 Windows 前端(mingw-w64 + wine)"
if ! FLUTTER_BIN="$FLUTTER_BIN" bash "$ROOT_DIR/buildsh/cross/build-ui-win-cross.sh" \
"$UI_SRC/build/windows/x64/runner/Release" \
>"$ROOT_DIR/build/logs/flutter-win-cross.log" 2>&1; then
echo "!! 交叉编译失败(日志:build/logs/flutter-win-cross.log)"
tail -5 "$ROOT_DIR/build/logs/flutter-win-cross.log" 2>/dev/null | sed 's/^/ /'
return 1
fi
mkdir -p "$ROOT_DIR/$DEST"
cp -R "$UI_SRC/build/windows/x64/runner/Release/." "$ROOT_DIR/$DEST/"
echo " -> $DEST(Flutter windows,交叉编译)"
}
pack_launcher() {
echo "==> 生成启动器产物(GC-<版本>-<系统>-<架构>)"
# --- Windows:exe 单文件(连同 GC-SAVEDOG.exe 一起打进 zip)---
# --- Windows:启动器 + 守护进程 + UI 后端 + Flutter 前端,整目录打包 ---
for pair in "win-x64:win-amd64" "win-arm64:win-arm64"; do
RID="${pair%%:*}"; LABEL="${pair##*:}"
SRC="$ROOT_DIR/dist/$LABEL"
[ -d "$SRC" ] || SRC="$ROOT_DIR/dist/$RID" # 兼容旧布局
[ -d "$SRC" ] || continue
# 注意排除守护进程:GC-SAVEDOG.exe 在字典序里排在 GC.exe 前面
EXE=$(ls "$SRC"/*.exe 2>/dev/null | grep -v 'GC-SAVEDOG' | head -1)
# 启动器固定是 GC.exe;后端与前端是可选的随包产物,不能当成启动器。
EXE="$SRC/GC.exe"
[ -f "$EXE" ] || EXE=$(ls "$SRC"/*.exe 2>/dev/null | grep -v 'GC-SAVEDOG\|GC.UI.Server\|GC-UI' | head -1)
[ -n "$EXE" ] || continue
TMP="$ROOT_DIR/dist/.winpkg-$LABEL"
rm -rf "$TMP"; mkdir -p "$TMP"
cp "$EXE" "$TMP/GC-${VERSION}-${LABEL}.exe"
cp -R "$SRC"/. "$TMP"/
rm -f "$TMP"/*.zip
mv "$TMP/$(basename "$EXE")" "$TMP/GC-${VERSION}-${LABEL}.exe"
chmod +x "$TMP/GC-${VERSION}-${LABEL}.exe" 2>/dev/null || true
if [ -f "$SRC/GC-SAVEDOG.exe" ]; then
cp "$SRC/GC-SAVEDOG.exe" "$TMP/GC-SAVEDOG.exe"
else
if [ ! -f "$TMP/GC-SAVEDOG.exe" ]; then
echo " !! 缺少 GC-SAVEDOG.exe,该平台将退回旧脚本更新"
fi
if [ ! -f "$TMP/GC-UI.exe" ]; then
echo " !! 包内没有 Flutter 前端,启动器将使用内置 Avalonia 界面"
fi
ZIP="$ROOT_DIR/dist/$LABEL/GC-${VERSION}-${LABEL}.zip"
rm -f "$ZIP"
( cd "$TMP" && zip -q "$ZIP" ./* )
( cd "$TMP" && zip -qr "$ZIP" . )
rm -rf "$TMP"
echo " -> dist/$LABEL/GC-${VERSION}-${LABEL}.zip"
done
# --- Linux:整目录打包(启动器 + 守护 + 后端 + Flutter 前端)---
SRC="$ROOT_DIR/dist/linux-amd64"
if [ -d "$SRC" ]; then
TMP="$ROOT_DIR/dist/.linuxpkg"
rm -rf "$TMP"; mkdir -p "$TMP"
cp -R "$SRC"/. "$TMP"/
rm -f "$TMP"/*.zip
if [ -f "$TMP/GC" ]; then
mv "$TMP/GC" "$TMP/GC-${VERSION}-linux-amd64"
chmod +x "$TMP/GC-${VERSION}-linux-amd64" 2>/dev/null || true
fi
if [ ! -f "$TMP/GC-UI" ]; then
echo " !! 包内没有 Flutter 前端,启动器将使用内置 Avalonia 界面"
fi
ZIP="$ROOT_DIR/dist/linux-amd64/GC-${VERSION}-linux-amd64.zip"
rm -f "$ZIP"
( cd "$TMP" && zip -qry "$ZIP" . )
rm -rf "$TMP"
echo " -> dist/linux-amd64/GC-${VERSION}-linux-amd64.zip"
fi
# --- macOS:先得到真实 .app 目录(改名 + 同步 Info.plist)---
MACAPP="$ROOT_DIR/dist/mac-arm64/GC.app"
if [ -d "$MACAPP" ]; then
@@ -284,7 +400,7 @@ package_mac_app() {
<dict>
<key>CFBundleName</key><string>GC</string>
<key>CFBundleDisplayName</key><string>GC</string>
<key>CFBundleIdentifier</key><string>cn.neorf.GC</string>
<key>CFBundleIdentifier</key><string>com.xhmcl.GC</string>
<key>CFBundleVersion</key><string>${VERSION}</string>
<key>CFBundleShortVersionString</key><string>${VERSION}</string>
<key>CFBundlePackageType</key><string>APPL</string>
+2 -2
View File
@@ -74,10 +74,10 @@ dll / json 的哈希 —— 本地文件被替换会直接拒绝加载。
"descriptionI18n": { "zh-CN": "……", "en": "……" },
"version": "1.6",
"updatedAt": "2026-11-14T08:00:00Z",
"author": "NeoRF",
"author": "Morris",
"tags": ["astronomy", "geography"],
"assembly": "EarthRotationModel.dll",
"type": "NeoRF.EarthModels.RotationModelFactory",
"type": "GC.EarthModels.RotationModelFactory",
"preview": "preview.png",
"apiVersion": 1,
"minAppVersion": "1.0.7"
+1 -1
View File
@@ -5,7 +5,7 @@
<TargetFramework>net8.0</TargetFramework>
<Nullable>enable</Nullable>
<ImplicitUsings>disable</ImplicitUsings>
<RootNamespace>NeoRF.EarthModels</RootNamespace>
<RootNamespace>GC.EarthModels</RootNamespace>
<AssemblyName>EarthModelPreview</AssemblyName>
<AllowUnsafeBlocks>true</AllowUnsafeBlocks>
</PropertyGroup>
+2 -2
View File
@@ -10,9 +10,9 @@ using Avalonia.Headless;
using Avalonia.Media.Imaging;
using Avalonia.Platform;
using GC.ModelSdk;
using NeoRF.EarthModels;
using GC.EarthModels;
namespace NeoRF.EarthModels.Preview;
namespace GC.EarthModels.Preview;
/// <summary>
/// 封面生成工具:给每个模型画一张 preview.png。
+2 -2
View File
@@ -11,7 +11,7 @@ using GC.Services;
// 仓库根 version.json 与 model/version.json(内容相同,便于两种源地址读取)。
// 仓库地址(编译产物的 Release 也发在这里):与启动器默认 updateRepository 保持一致。
const string Repository = "https://gitcode.com/Morris_1/GC";
const string Repository = "https://git.xhmcl.com/Morris/GC";
// 位置参数:<仓库根> <启动器版本>;开关:--launcher-only
// --launcher-only 只刷新 launcher.packages(构建脚本在打完 zip 之后再调一次),
@@ -150,7 +150,7 @@ var packages = new Dictionary<string, Dictionary<string, object>>();
// 2) 仓库里的编译产物 dist/<系统>-<架构>/GC-<版本>-<系统>-<架构>.zip ——
// 不发 Release、只提交产物也能更新(用户明确要求支持这种布局)。
// 两种都写:url 只是「去哪儿找」,真正的完整性凭据是下面的 sha256(受签名保护)。
var releaseBase = $"{Repository}/releases/download/v{launcherVersion}";
var releaseBase = $"{Repository}/releases/download/{launcherVersion}";
foreach (var rid in new[] { "win-x64", "win-arm64", "osx-arm64", "osx-x64", "linux-x64" })
{
var label = LauncherArtifacts.LabelOf(rid);
+1 -1
View File
@@ -12,7 +12,7 @@ using Avalonia.Media.Imaging;
using Avalonia.Platform;
using Avalonia.Threading;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
public enum SceneView
{
+1 -1
View File
@@ -11,7 +11,7 @@ using Avalonia.Media;
using Avalonia.Threading;
using GC.ModelSdk;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 模型自己的界面:画布 + 触控友好工具栏 + 课堂演示卡 + 节气定格与步进。
+1 -1
View File
@@ -2,7 +2,7 @@ using System;
using Avalonia.Controls;
using GC.ModelSdk;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 地球模型共享运行时:读自己目录下的 scene.json / land.json / i18n,
+1 -1
View File
@@ -2,7 +2,7 @@ using System;
using System.Collections.Generic;
using System.Numerics;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 地理模型的球面几何工具:经纬度 ↔ 单位球坐标、正交投影到屏幕、
+1 -1
View File
@@ -4,7 +4,7 @@ using System.IO;
using System.Text.Json;
using System.Text.Json.Serialization;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>&lt;id&gt;.model/land.json —— 简化的大陆轮廓(经纬度多边形)。</summary>
public sealed class LandData
+1 -1
View File
@@ -3,7 +3,7 @@ using System.Text.Encodings.Web;
using System.Text.Json;
using System.Text.Json.Serialization;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>模型自己的 JSON 读写(不依赖启动器)。</summary>
public static class ModelJson
+1 -1
View File
@@ -4,7 +4,7 @@ using System.Globalization;
using System.IO;
using System.Text.Json;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 模型自己的一份文案。优先读模型数据目录里的 <c>i18n/&lt;language&gt;.json</c>,
+1 -1
View File
@@ -1,6 +1,6 @@
using System.Collections.Generic;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>&lt;id&gt;.model/scene.json —— 模型数据(可视化场景描述)。</summary>
public sealed class SceneDefinition
+1 -1
View File
@@ -2,7 +2,7 @@ using System;
using System.IO;
using Avalonia.Media;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 模型自己的场景运行时:场景描述 + 预烘焙地表纹理 + 调色板。
+1 -1
View File
@@ -3,7 +3,7 @@ using System.Collections.Generic;
using System.Threading.Tasks;
using Avalonia.Media;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 预烘焙的等经纬度地表贴图:反照率 + 高度 + 冰盖 + 云层 + 夜间灯光。
+1 -1
View File
@@ -3,7 +3,7 @@ using System.Numerics;
using System.Threading.Tasks;
using Avalonia.Media.Imaging;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 球体像素级渲染:正交投影 + 预烘焙地表纹理 + 地形光照 + 云层 + 夜灯 + 大气边缘光。
+4 -4
View File
@@ -16,8 +16,8 @@
"terrain"
],
"assembly": "ContourMapModel.dll",
"type": "NeoRF.ContourMap.ContourMapFactory",
"version": "1.0",
"type": "GC.ContourMap.ContourMapFactory",
"version": "1.1",
"chrome": {
"titleBar": "#0C1828",
"titleBorder": "#1B2740",
@@ -25,6 +25,6 @@
"button": "#9FB4D4",
"frame": "#0A1524"
},
"build": "e4b3f2b87e",
"updatedAt": "2026-11-14T11:34:35Z"
"build": "773ab2161d",
"updatedAt": "2026-11-18T10:16:41Z"
}
+1 -1
View File
@@ -4,7 +4,7 @@
<TargetFramework>net8.0</TargetFramework>
<Nullable>enable</Nullable>
<ImplicitUsings>disable</ImplicitUsings>
<RootNamespace>NeoRF.ContourMap</RootNamespace>
<RootNamespace>GC.ContourMap</RootNamespace>
<AssemblyName>ContourMapModel</AssemblyName>
<AllowUnsafeBlocks>true</AllowUnsafeBlocks>
<IsPackable>false</IsPackable>
+1 -1
View File
@@ -6,7 +6,7 @@ using Avalonia.Layout;
using Avalonia.Media;
using GC.ModelSdk;
namespace NeoRF.ContourMap;
namespace GC.ContourMap;
/// <summary>等高线模型入口(清单里的 type 指向这里)。</summary>
public sealed class ContourMapFactory : IModelFactory
+1 -1
View File
@@ -5,7 +5,7 @@ using Avalonia.Controls;
using Avalonia.Layout;
using Avalonia.Media;
namespace NeoRF.ContourMap;
namespace GC.ContourMap;
/// <summary>等高线模型的界面:顶部标题、中间双图联动、右侧判读要点、底部实时读数。</summary>
public sealed class ContourPage
+1 -1
View File
@@ -6,7 +6,7 @@ using Avalonia;
using Avalonia.Controls;
using Avalonia.Media;
namespace NeoRF.ContourMap;
namespace GC.ContourMap;
/// <summary>
/// 等高线教学画布,左右两块:
+1 -1
View File
@@ -1,6 +1,6 @@
using System.Collections.Generic;
namespace NeoRF.ContourMap;
namespace GC.ContourMap;
/// <summary>内置全量文案兜底:没有语言包也能完整显示。</summary>
internal static class DefaultTexts
+1 -1
View File
@@ -1,7 +1,7 @@
using System;
using System.Collections.Generic;
namespace NeoRF.ContourMap;
namespace GC.ContourMap;
/// <summary>地形部位识别结果:课本要求学生能在等高线图上认出这五种部位。</summary>
public enum TerrainFeature
+1 -1
View File
@@ -1,7 +1,7 @@
using System;
using System.Collections.Generic;
namespace NeoRF.ContourMap;
namespace GC.ContourMap;
/// <summary>五种基本地形类型(教科书分类)。</summary>
public enum TerrainKind
+4 -4
View File
@@ -9,7 +9,7 @@
"en": "Climate zones, continent/ocean outlines, plates and borders — clean line art."
},
"assembly": "EarthGeographyModel.dll",
"type": "NeoRF.EarthModels.GeographyModelFactory",
"type": "GC.EarthModels.GeographyModelFactory",
"author": "Morris GC",
"tags": [
"geography",
@@ -17,7 +17,7 @@
"atlas"
],
"dataDir": "earth-geography.model",
"version": "1.8",
"version": "1.9",
"chrome": {
"titleBar": "#0C1828",
"titleBorder": "#1B2740",
@@ -25,6 +25,6 @@
"button": "#9FB4D4",
"frame": "#0A1524"
},
"build": "3b645c45c2",
"updatedAt": "2026-11-14T11:34:35Z"
"build": "cc68b8863b",
"updatedAt": "2026-11-18T10:16:41Z"
}
@@ -4,7 +4,7 @@
<TargetFramework>net8.0</TargetFramework>
<Nullable>enable</Nullable>
<ImplicitUsings>disable</ImplicitUsings>
<RootNamespace>NeoRF.EarthModels</RootNamespace>
<RootNamespace>GC.EarthModels</RootNamespace>
<AssemblyName>EarthGeographyModel</AssemblyName>
<AllowUnsafeBlocks>true</AllowUnsafeBlocks>
<IsPackable>false</IsPackable>
+1 -1
View File
@@ -1,7 +1,7 @@
using System.Collections.Generic;
using System.Text.Json.Serialization;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>地球地理模型的数据文件:全部是经纬度折线,只有轮廓没有填色。</summary>
public sealed class GeoData
@@ -7,7 +7,7 @@ using Avalonia.Layout;
using Avalonia.Media;
using GC.ModelSdk;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>
/// 地球地理模型:五带划分 + 七大洲四大洋轮廓 + 六大板块与洲界,纯线稿。
+1 -1
View File
@@ -8,7 +8,7 @@ using Avalonia.Input;
using Avalonia.Media;
using GC.ModelSdk;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
public enum GeoMode { Sphere3D, Flat2D }
+5 -5
View File
@@ -6,7 +6,7 @@
"zh-CN": "地球公转",
"en": "Earth Revolution"
},
"author": "NeoRF",
"author": "Morris",
"description": "四季更替、黄赤交角与二分二至",
"descriptionI18n": {
"zh-CN": "地球绕太阳公转一年:地轴指向不变,太阳直射点南北往返,形成四季。",
@@ -20,10 +20,10 @@
"entry": "scene.json",
"license": "MIT",
"assembly": "EarthRevolutionModel.dll",
"type": "NeoRF.EarthModels.RevolutionModelFactory",
"type": "GC.EarthModels.RevolutionModelFactory",
"preview": "preview.png",
"apiVersion": 1,
"version": "1.6",
"version": "1.7",
"chrome": {
"titleBar": "#0C1828",
"titleBorder": "#1B2740",
@@ -31,6 +31,6 @@
"button": "#9FB4D4",
"frame": "#0A1524"
},
"build": "947efa36bb",
"updatedAt": "2026-11-14T11:34:35Z"
"build": "53b7a0fbc3",
"updatedAt": "2026-11-18T10:16:41Z"
}
@@ -4,7 +4,7 @@
<TargetFramework>net8.0</TargetFramework>
<Nullable>enable</Nullable>
<ImplicitUsings>disable</ImplicitUsings>
<RootNamespace>NeoRF.EarthModels</RootNamespace>
<RootNamespace>GC.EarthModels</RootNamespace>
<AssemblyName>EarthRevolutionModel</AssemblyName>
<AllowUnsafeBlocks>true</AllowUnsafeBlocks>
<IsPackable>false</IsPackable>
@@ -1,6 +1,6 @@
using GC.ModelSdk;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>地球公转模型入口(清单里的 type 指向这里)。</summary>
public sealed class RevolutionModelFactory : IModelFactory
+5 -5
View File
@@ -6,7 +6,7 @@
"zh-CN": "地球自转",
"en": "Earth Rotation"
},
"author": "NeoRF",
"author": "Morris",
"description": "昼夜交替、晨昏线与太阳直射点",
"descriptionI18n": {
"zh-CN": "观察自转中的地球:昼夜半球、晨昏线与太阳直射点位置。",
@@ -20,10 +20,10 @@
"entry": "scene.json",
"license": "MIT",
"assembly": "EarthRotationModel.dll",
"type": "NeoRF.EarthModels.RotationModelFactory",
"type": "GC.EarthModels.RotationModelFactory",
"preview": "preview.png",
"apiVersion": 1,
"version": "1.6",
"version": "1.7",
"chrome": {
"titleBar": "#0C1828",
"titleBorder": "#1B2740",
@@ -31,6 +31,6 @@
"button": "#9FB4D4",
"frame": "#0A1524"
},
"build": "a803d9c020",
"updatedAt": "2026-11-14T11:34:35Z"
"build": "ecd52665f9",
"updatedAt": "2026-11-18T10:16:41Z"
}
@@ -4,7 +4,7 @@
<TargetFramework>net8.0</TargetFramework>
<Nullable>enable</Nullable>
<ImplicitUsings>disable</ImplicitUsings>
<RootNamespace>NeoRF.EarthModels</RootNamespace>
<RootNamespace>GC.EarthModels</RootNamespace>
<AssemblyName>EarthRotationModel</AssemblyName>
<AllowUnsafeBlocks>true</AllowUnsafeBlocks>
<IsPackable>false</IsPackable>
@@ -1,6 +1,6 @@
using GC.ModelSdk;
namespace NeoRF.EarthModels;
namespace GC.EarthModels;
/// <summary>地球自转模型入口(清单里的 type 指向这里)。</summary>
public sealed class RotationModelFactory : IModelFactory
+4 -4
View File
@@ -21,10 +21,10 @@
"entry": "scales.json",
"license": "MIT",
"assembly": "ScaleCalculatorModel.dll",
"type": "NeoRF.ScaleCalculator.ScaleCalculatorFactory",
"type": "GC.ScaleCalculator.ScaleCalculatorFactory",
"preview": "preview.png",
"apiVersion": 1,
"version": "1.5",
"version": "1.6",
"chrome": {
"titleBar": "#FFFFFF",
"titleBorder": "#E3E8F3",
@@ -32,6 +32,6 @@
"button": "#5B6A86",
"frame": "#F4F6FB"
},
"build": "02a555272a",
"updatedAt": "2026-11-14T11:34:35Z"
"build": "105653737d",
"updatedAt": "2026-11-18T10:16:41Z"
}
+1 -1
View File
@@ -1,6 +1,6 @@
using System.Collections.Generic;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
/// <summary>内置全量文案兜底:即使模型包里没有语言包也能完整显示。</summary>
internal static class DefaultTexts
@@ -1,6 +1,6 @@
using GC.ModelSdk;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
/// <summary>比例尺计算器模型入口(清单里的 type 指向这里)。</summary>
public sealed class ScaleCalculatorFactory : IModelFactory
@@ -4,7 +4,7 @@
<TargetFramework>net8.0</TargetFramework>
<Nullable>enable</Nullable>
<ImplicitUsings>disable</ImplicitUsings>
<RootNamespace>NeoRF.ScaleCalculator</RootNamespace>
<RootNamespace>GC.ScaleCalculator</RootNamespace>
<AssemblyName>ScaleCalculatorModel</AssemblyName>
<AllowUnsafeBlocks>true</AllowUnsafeBlocks>
<IsPackable>false</IsPackable>
@@ -5,7 +5,7 @@ using System.Text.Json;
using Avalonia.Controls;
using GC.ModelSdk;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
/// <summary>
/// 比例尺计算器运行时。Prepare 在后台线程读数据/语言包,CreateView 在 UI 线程构建界面。
@@ -5,7 +5,7 @@ using Avalonia.Controls.Primitives;
using Avalonia.Layout;
using Avalonia.Media;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
public sealed partial class ScaleCalculatorView
{
@@ -5,7 +5,7 @@ using Avalonia.Controls;
using Avalonia.Controls.Primitives;
using Avalonia.Media;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
public sealed partial class ScaleCalculatorView
{
@@ -8,7 +8,7 @@ using Avalonia.Input;
using Avalonia.Layout;
using Avalonia.Media;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
/// <summary>
/// 比例尺计算器主界面。三栏(已知量 / 可视化标尺 / 三种写法与判读)+ 底部实地尺与练习。
+1 -1
View File
@@ -4,7 +4,7 @@ using System.IO;
using System.Text.Json;
using System.Text.Json.Serialization;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
public sealed class PresetItem
{
+1 -1
View File
@@ -1,7 +1,7 @@
using System;
using System.Globalization;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
/// <summary>三种求解模式:待求的量。</summary>
public enum SolveMode
+1 -1
View File
@@ -4,7 +4,7 @@ using Avalonia;
using Avalonia.Controls;
using Avalonia.Media;
namespace NeoRF.ScaleCalculator;
namespace GC.ScaleCalculator;
/// <summary>
/// 自绘可视化标尺:上条「图上距离」按真实厘米画,下条「实地距离」按同一比例尺压缩,
+48 -48
View File
@@ -1,103 +1,103 @@
{
"schema": 1,
"generated": "2026-11-14T11:34:35Z",
"repository": "https://gitcode.com/Morris_1/GC",
"generated": "2026-11-18T10:16:41Z",
"repository": "https://git.xhmcl.com/Morris/GC",
"branch": "main",
"modelDir": "model",
"launcher": {
"version": "1.0.7",
"version": "1.0.9",
"revision": "",
"packages": {
"win-x64": {
"path": "dist/win-amd64/GC-1.0.7-win-amd64.zip",
"path": "dist/win-amd64/GC-1.0.9-win-amd64.zip",
"dir": "dist/win-amd64",
"name": "GC-1.0.7-win-amd64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-win-amd64.zip",
"sha256": "f90ff51ac6b041ae238cbeb4672622b0d029142a9d8b0705f08e654336512308",
"size": 46363183
"name": "GC-1.0.9-win-amd64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-win-amd64.zip",
"sha256": "0807f1005e2d8bd54316529670cf1c3c89a2df07bd39297145f21c9a0aae5f04",
"size": 114372206
},
"win-arm64": {
"path": "dist/win-arm64/GC-1.0.7-win-arm64.zip",
"path": "dist/win-arm64/GC-1.0.9-win-arm64.zip",
"dir": "dist/win-arm64",
"name": "GC-1.0.7-win-arm64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-win-arm64.zip",
"sha256": "0b2bab2c3ac7e6223d8dd0b0faf9a0994319fa5ad13826addf7b402619b812e0",
"size": 44390354
"name": "GC-1.0.9-win-arm64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-win-arm64.zip",
"sha256": "ffdc37f8ea5041d69be88ffbcbf9ba5d80f7fb97c6b3debc5a918ff89f9e7f60",
"size": 110425463
},
"osx-arm64": {
"path": "dist/mac-arm64/GC-1.0.7-mac-arm64.zip",
"path": "dist/mac-arm64/GC-1.0.9-mac-arm64.zip",
"dir": "dist/mac-arm64",
"name": "GC-1.0.7-mac-arm64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-mac-arm64.zip",
"sha256": "e5fd355bace68dc0794eb3e049cbef63c952a60a765ab3806adaf1199e1b09ab",
"size": 9178314
"name": "GC-1.0.9-mac-arm64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-mac-arm64.zip",
"sha256": "e62bbc8c9925d8158f850440600b5d16af7539c85651a5ebcc5f9a85d4c9bb01",
"size": 60066040
},
"osx-x64": {
"path": "dist/mac-x64/GC-1.0.7-mac-x64.zip",
"path": "dist/mac-x64/GC-1.0.9-mac-x64.zip",
"dir": "dist/mac-x64",
"name": "GC-1.0.7-mac-x64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-mac-x64.zip"
"name": "GC-1.0.9-mac-x64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-mac-x64.zip"
},
"linux-x64": {
"path": "dist/linux-amd64/GC-1.0.7-linux-amd64.zip",
"path": "dist/linux-amd64/GC-1.0.9-linux-amd64.zip",
"dir": "dist/linux-amd64",
"name": "GC-1.0.7-linux-amd64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-linux-amd64.zip"
"name": "GC-1.0.9-linux-amd64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-linux-amd64.zip"
}
}
},
"models": [
{
"id": "contour-map",
"version": "1.0",
"build": "e4b3f2b87e",
"manifestSha256": "ee0897d46ee85126fbfd0d07f5ca3111950d0c36f9b8a80e4eb6ae85d226da4f",
"filesSha256": "b1f323fb41dec4f45992a30ff8726f3307f83b564127aff99bcb3d044c79d2bd",
"version": "1.1",
"build": "773ab2161d",
"manifestSha256": "f86a3f83d5953cafc333585da3009d8846448f6a8a9df13b39cde57b36037733",
"filesSha256": "a6bdf9b4273aabee50c3c94ceab4d0abee15f0df1af90c58bdbb796e0d2d5699",
"files": 5,
"dir": "model/contour-map"
},
{
"id": "earth-geography",
"version": "1.8",
"build": "3b645c45c2",
"manifestSha256": "a9f30fd4a1dd0aeccb88c892579c93bf32a92379d7b3f545b28f6cac612f9871",
"filesSha256": "0e55d2f9bacc3e0ff42f5c45d9e7c265864df9784b1609c09dcb32d21b4addfc",
"version": "1.9",
"build": "cc68b8863b",
"manifestSha256": "448f050fded46d7bfc8f0c3856e741c4a4f82523c8e012dd846ddcd400ff394a",
"filesSha256": "c018ba481831e23d3183a38ac47251f19754c7464baa5d85b47cea7a49fcfa95",
"files": 11,
"dir": "model/earth-geography"
},
{
"id": "earth-revolution",
"version": "1.6",
"build": "947efa36bb",
"manifestSha256": "feb715cde8ad5da9ecfb48785a95e6fc82930cc92c668514b328915366c2f57a",
"filesSha256": "a37e0b493c78bb0a04a276512b612be3f8e7a178ed1a7fc72acb5353aa57f7c5",
"version": "1.7",
"build": "53b7a0fbc3",
"manifestSha256": "c69fc53f50213c6ab7658e1a761a20d2c55a7a344beb3c75a30393c26fa40167",
"filesSha256": "4cd45b0324a77574a0da3a939c2a6faebc785c5a24cb50136d62a78a6ea2e9b1",
"files": 7,
"dir": "model/earth-revolution"
},
{
"id": "earth-rotation",
"version": "1.6",
"build": "a803d9c020",
"manifestSha256": "56ed397cbc008bd9ec8bea0ee34a94a28ab29ce39a8b096b0629e529883b4dff",
"filesSha256": "4e4428812d18d15a99105e73c027b99f3197033f0138d643ba69c15fabc9d8f6",
"version": "1.7",
"build": "ecd52665f9",
"manifestSha256": "cbf12a47747a331c9980260f39169b1813bb4b52a8916995fda05755267bddca",
"filesSha256": "594b005a6a9f36cd0b5d4e4a7a0b1ab42d53c8032832545b71c3915493d56c8e",
"files": 7,
"dir": "model/earth-rotation"
},
{
"id": "scale-calculator",
"version": "1.5",
"build": "02a555272a",
"manifestSha256": "d00034888d9b9da03338b7f394d1bdf33f73b1fbdd7e8f154d85b9080318ab13",
"filesSha256": "4a5fbf898df1d98eddf68b5d3929ae7b25cd7bcdfdfa36b5ad0ed72d9941d049",
"version": "1.6",
"build": "105653737d",
"manifestSha256": "fc6f7deb1efb076cc0bbee732e7de8f007ed74bc837dba2268be1e0adc1839d3",
"filesSha256": "732dd26406e0f1e836970499d7ea644def332ce909d7f8aa0a403bbe7337e604",
"files": 6,
"dir": "model/scale-calculator"
}
],
"signature": {
"alg": "ECDSA-P256-SHA256",
"keyId": "gc-2026-11",
"value": "LHaF2bw+IZeWUw2qLQM1IQHoNXsHNko38dyjP45Jy41KtlyhvJhhFaNh+THKhAU+6jSzV1eFHgbwasboYBOa5w==",
"contentSha256": "749055593bf9839837428d900d523b3363486556970cbf4e2daa25001ab174c8",
"signedAt": "2026-11-14T11:36:03Z"
"keyId": "gc-2026-12",
"value": "A2jaSxRK1B43k8uOWmC/8diYG6JYUncGgjXW8B1ntO5Ag5rsG7Pb2gMz5ad6AcwjZ9zs8qtsSxJv8vLsUNXtWw==",
"contentSha256": "3bf738a164537e5d575e75c314f0ac01af1cb5d4d7cb882489d8dedeb73f51e9",
"signedAt": "2026-11-18T10:18:01Z"
}
}
+48 -48
View File
@@ -1,103 +1,103 @@
{
"schema": 1,
"generated": "2026-11-14T11:34:35Z",
"repository": "https://gitcode.com/Morris_1/GC",
"generated": "2026-11-18T10:16:41Z",
"repository": "https://git.xhmcl.com/Morris/GC",
"branch": "main",
"modelDir": "model",
"launcher": {
"version": "1.0.7",
"version": "1.0.9",
"revision": "",
"packages": {
"win-x64": {
"path": "dist/win-amd64/GC-1.0.7-win-amd64.zip",
"path": "dist/win-amd64/GC-1.0.9-win-amd64.zip",
"dir": "dist/win-amd64",
"name": "GC-1.0.7-win-amd64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-win-amd64.zip",
"sha256": "f90ff51ac6b041ae238cbeb4672622b0d029142a9d8b0705f08e654336512308",
"size": 46363183
"name": "GC-1.0.9-win-amd64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-win-amd64.zip",
"sha256": "0807f1005e2d8bd54316529670cf1c3c89a2df07bd39297145f21c9a0aae5f04",
"size": 114372206
},
"win-arm64": {
"path": "dist/win-arm64/GC-1.0.7-win-arm64.zip",
"path": "dist/win-arm64/GC-1.0.9-win-arm64.zip",
"dir": "dist/win-arm64",
"name": "GC-1.0.7-win-arm64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-win-arm64.zip",
"sha256": "0b2bab2c3ac7e6223d8dd0b0faf9a0994319fa5ad13826addf7b402619b812e0",
"size": 44390354
"name": "GC-1.0.9-win-arm64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-win-arm64.zip",
"sha256": "ffdc37f8ea5041d69be88ffbcbf9ba5d80f7fb97c6b3debc5a918ff89f9e7f60",
"size": 110425463
},
"osx-arm64": {
"path": "dist/mac-arm64/GC-1.0.7-mac-arm64.zip",
"path": "dist/mac-arm64/GC-1.0.9-mac-arm64.zip",
"dir": "dist/mac-arm64",
"name": "GC-1.0.7-mac-arm64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-mac-arm64.zip",
"sha256": "e5fd355bace68dc0794eb3e049cbef63c952a60a765ab3806adaf1199e1b09ab",
"size": 9178314
"name": "GC-1.0.9-mac-arm64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-mac-arm64.zip",
"sha256": "e62bbc8c9925d8158f850440600b5d16af7539c85651a5ebcc5f9a85d4c9bb01",
"size": 60066040
},
"osx-x64": {
"path": "dist/mac-x64/GC-1.0.7-mac-x64.zip",
"path": "dist/mac-x64/GC-1.0.9-mac-x64.zip",
"dir": "dist/mac-x64",
"name": "GC-1.0.7-mac-x64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-mac-x64.zip"
"name": "GC-1.0.9-mac-x64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-mac-x64.zip"
},
"linux-x64": {
"path": "dist/linux-amd64/GC-1.0.7-linux-amd64.zip",
"path": "dist/linux-amd64/GC-1.0.9-linux-amd64.zip",
"dir": "dist/linux-amd64",
"name": "GC-1.0.7-linux-amd64.zip",
"url": "https://gitcode.com/Morris_1/GC/releases/download/v1.0.7/GC-1.0.7-linux-amd64.zip"
"name": "GC-1.0.9-linux-amd64.zip",
"url": "https://git.xhmcl.com/Morris/GC/releases/download/1.0.9/GC-1.0.9-linux-amd64.zip"
}
}
},
"models": [
{
"id": "contour-map",
"version": "1.0",
"build": "e4b3f2b87e",
"manifestSha256": "ee0897d46ee85126fbfd0d07f5ca3111950d0c36f9b8a80e4eb6ae85d226da4f",
"filesSha256": "b1f323fb41dec4f45992a30ff8726f3307f83b564127aff99bcb3d044c79d2bd",
"version": "1.1",
"build": "773ab2161d",
"manifestSha256": "f86a3f83d5953cafc333585da3009d8846448f6a8a9df13b39cde57b36037733",
"filesSha256": "a6bdf9b4273aabee50c3c94ceab4d0abee15f0df1af90c58bdbb796e0d2d5699",
"files": 5,
"dir": "model/contour-map"
},
{
"id": "earth-geography",
"version": "1.8",
"build": "3b645c45c2",
"manifestSha256": "a9f30fd4a1dd0aeccb88c892579c93bf32a92379d7b3f545b28f6cac612f9871",
"filesSha256": "0e55d2f9bacc3e0ff42f5c45d9e7c265864df9784b1609c09dcb32d21b4addfc",
"version": "1.9",
"build": "cc68b8863b",
"manifestSha256": "448f050fded46d7bfc8f0c3856e741c4a4f82523c8e012dd846ddcd400ff394a",
"filesSha256": "c018ba481831e23d3183a38ac47251f19754c7464baa5d85b47cea7a49fcfa95",
"files": 11,
"dir": "model/earth-geography"
},
{
"id": "earth-revolution",
"version": "1.6",
"build": "947efa36bb",
"manifestSha256": "feb715cde8ad5da9ecfb48785a95e6fc82930cc92c668514b328915366c2f57a",
"filesSha256": "a37e0b493c78bb0a04a276512b612be3f8e7a178ed1a7fc72acb5353aa57f7c5",
"version": "1.7",
"build": "53b7a0fbc3",
"manifestSha256": "c69fc53f50213c6ab7658e1a761a20d2c55a7a344beb3c75a30393c26fa40167",
"filesSha256": "4cd45b0324a77574a0da3a939c2a6faebc785c5a24cb50136d62a78a6ea2e9b1",
"files": 7,
"dir": "model/earth-revolution"
},
{
"id": "earth-rotation",
"version": "1.6",
"build": "a803d9c020",
"manifestSha256": "56ed397cbc008bd9ec8bea0ee34a94a28ab29ce39a8b096b0629e529883b4dff",
"filesSha256": "4e4428812d18d15a99105e73c027b99f3197033f0138d643ba69c15fabc9d8f6",
"version": "1.7",
"build": "ecd52665f9",
"manifestSha256": "cbf12a47747a331c9980260f39169b1813bb4b52a8916995fda05755267bddca",
"filesSha256": "594b005a6a9f36cd0b5d4e4a7a0b1ab42d53c8032832545b71c3915493d56c8e",
"files": 7,
"dir": "model/earth-rotation"
},
{
"id": "scale-calculator",
"version": "1.5",
"build": "02a555272a",
"manifestSha256": "d00034888d9b9da03338b7f394d1bdf33f73b1fbdd7e8f154d85b9080318ab13",
"filesSha256": "4a5fbf898df1d98eddf68b5d3929ae7b25cd7bcdfdfa36b5ad0ed72d9941d049",
"version": "1.6",
"build": "105653737d",
"manifestSha256": "fc6f7deb1efb076cc0bbee732e7de8f007ed74bc837dba2268be1e0adc1839d3",
"filesSha256": "732dd26406e0f1e836970499d7ea644def332ce909d7f8aa0a403bbe7337e604",
"files": 6,
"dir": "model/scale-calculator"
}
],
"signature": {
"alg": "ECDSA-P256-SHA256",
"keyId": "gc-2026-11",
"value": "LHaF2bw+IZeWUw2qLQM1IQHoNXsHNko38dyjP45Jy41KtlyhvJhhFaNh+THKhAU+6jSzV1eFHgbwasboYBOa5w==",
"contentSha256": "749055593bf9839837428d900d523b3363486556970cbf4e2daa25001ab174c8",
"signedAt": "2026-11-14T11:36:03Z"
"keyId": "gc-2026-12",
"value": "A2jaSxRK1B43k8uOWmC/8diYG6JYUncGgjXW8B1ntO5Ag5rsG7Pb2gMz5ad6AcwjZ9zs8qtsSxJv8vLsUNXtWw==",
"contentSha256": "3bf738a164537e5d575e75c314f0ac01af1cb5d4d7cb882489d8dedeb73f51e9",
"signedAt": "2026-11-18T10:18:01Z"
}
}