Files
Morris 5b628971a9
PR 审核 / 后端编译 (pull_request) Canceled after 0s
PR 审核 / 后端自检 (pull_request) Canceled after 0s
PR 审核 / 前端检查(Flutter) (pull_request) Canceled after 0s
PR 审核 / 安全扫描 (pull_request) Canceled after 0s
PR 审核 / 审核汇总 (pull_request) Canceled after 0s
feat(contour-map): 重写为可交互 3D 等高线模型,新增五大地貌专题
- 新增 LandformKind 与五套高度场生成器:穹状山峰、宽脊山脊、V 形山谷、双峰鞍部、台地陡崖
- 3D 视图重写:拖动旋转 / 滚轮缩放、按包围盒自动取景、法线光照、四周裙边侧壁、
  切割步骤改为把高度压到切面得到真实截面并用求交线精确出线
- 四步实验动画(等高切割 → 形成交线 → 垂直投影 → 疏密判坡),俯视 / 立体切换
- 界面重排:地貌标签移到画布上方(WrapPanel,窄屏自动换行并隐藏侧栏),
  右侧栏放实验流程 / 观察面板 / 判读要点;播放、重置、视图、上色、实时读数,空格与 1–5 快捷键、全屏
- 文案 90 个键中英双语;LoadTexts 改为「内置默认 + i18n 文件覆盖」,此前完全忽略语言包
- 修复三处渲染缺陷:Chain() 只向尾部延伸把等高线切成虚线;坡度归一化写死导致判坡整片红;
  切割只是叠加半透明板而山尖仍在
- 清单版本 1.1 → 1.2,描述与 help.json 同步;62×62 面片 + 画刷缓存,1440×900 单帧约 35ms
2026-11-19 20:45:03 +08:00

119 lines
6.2 KiB
JSON
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"zh-CN": {
"title": "如何使用 · 等高线地形与五大典型地貌",
"sections": [
{
"h": "开始使用(跟着做)",
"lines": [
"第 1 步:点右下角「开始实验」,在立体地形里观察水平切面下降、交线形成、垂直投影与疏密判坡四步动画。",
"第 2 步:在立体地形上按住鼠标拖动可旋转视角,滚轮缩放;这是可交互的 3D 地形。",
"第 3 步:点画布上方「五大典型地貌」标签(山峰/山脊/山谷/鞍部/陡崖),画面换成对应的专门地形并叠加完整等高线,观察各自的等高线特征。",
"第 4 步:点底部「俯视图 / 立体图」在等高线地图与 3D 地形间切换;鼠标悬停任意位置,底部显示该点海拔与地形部位。",
"第 5 步:点「上色 / 取消上色」对比分层设色与纯等高线;点「全屏」进入全屏演示。"
]
},
{
"h": "键盘快捷键",
"lines": [
"空格:播放 / 暂停实验。",
"数字 1 – 5:依次切换到山峰、山脊、山谷、鞍部、陡崖。"
]
},
{
"h": "四步实验流程",
"lines": [
"等高切割:一个水平面从山顶向下移动,与山体在同一海拔相交。",
"形成交线:每个水平切面留下一条闭合交线,多层交线共同描述山体起伏。",
"投影成图:各高度的交线沿垂线投影到同一平面,累积成完整等高线图。",
"疏密判坡:坡度着色叠加等高线,陡处线密、缓处线疏。"
]
},
{
"h": "五大典型地貌的判读",
"lines": [
"山峰:等高线闭合,数值由中心向四周递减(若向内降低则为洼地)。",
"山脊:等高线向海拔低处凸出(凸低为脊),脊线是分水线。",
"山谷:等高线向海拔高处凸出(凸高为谷),谷线是集水线,常发育河流。",
"鞍部:两座山峰之间相对低洼,俯视轮廓呈马鞍状收腰。",
"陡崖:等高线密集甚至重合,近乎垂直;n 条线重合时 (n−1)d ≤ ΔH < (n+1)d。"
]
},
{
"h": "等高线基础",
"lines": [
"同一条等高线上各点海拔相等;相邻等高线之间的高差叫等高距(本图 100 米)。",
"等高线越密坡越陡,越疏坡越缓。",
"每 5 条加粗一条叫计曲线,标注海拔便于读数。",
"海拔:某地高出海平面的垂直距离;相对高度:两点海拔之差。"
]
},
{
"h": "地图符号",
"lines": [
"分层设色按固定高程档位套固定色阶(深绿→浅绿→绿→浅黄→黄→浅褐→褐→白)。",
"山峰用 ▲ 加高程数字标注;河流用蓝色线沿谷底绘制;陡崖用红色锯齿线表示。",
"指北针在图幅右上,比例尺在左下,分层设色图例在右下,地形剖面图在底部。"
]
}
]
},
"en": {
"title": "How to use · Contour Lines & Five Landforms",
"sections": [
{
"h": "Getting started (follow along)",
"lines": [
"Step 1: press Start to watch the four-step animation — contour cutting, line formation, vertical projection and slope reading.",
"Step 2: drag with the mouse to rotate the 3D terrain, scroll to zoom; it is fully interactive.",
"Step 3: click a landform tab above the canvas (peak / ridge / valley / saddle / cliff) to load its dedicated terrain with its full contour pattern.",
"Step 4: toggle Top view / 3D view at the bottom; hover anywhere to read elevation and terrain feature.",
"Step 5: use Colour / No colour to compare hypsometric tint with pure contour lines; use Fullscreen for presentation."
]
},
{
"h": "Keyboard shortcuts",
"lines": [
"Space: play / pause the experiment.",
"Numbers 1 – 5: switch to peak, ridge, valley, saddle, cliff."
]
},
{
"h": "The four experiment steps",
"lines": [
"Contour cutting: a horizontal plane descends from the summit and intersects the mountain at one elevation.",
"Forming lines: each slice leaves a closed intersection line; stacked lines describe the relief.",
"Projection: intersection lines are projected vertically onto one plane, building the contour map.",
"Slope density: slope shading over contours — dense lines mean steep, sparse lines mean gentle."
]
},
{
"h": "Reading the five landforms",
"lines": [
"Peak: closed contours, values decrease outward (if they decrease inward it is a depression).",
"Ridge: contours bulge toward lower ground; a watershed line.",
"Valley: contours bulge toward higher ground; a drainage line, often a stream.",
"Saddle: low ground between two peaks, pinched like a saddle in plan view.",
"Cliff: contours crowd or overlap, nearly vertical; n overlapping lines: (n−1)d ≤ ΔH < (n+1)d."
]
},
{
"h": "Contour basics",
"lines": [
"All points on one contour share the same elevation; the gap between neighbours is the contour interval (100 m here).",
"Closer contours mean steeper slopes; wider spacing means gentler slopes.",
"Every 5th contour is bolded as an index contour and labelled with elevation.",
"Elevation is height above sea level; relative height is the difference between two elevations."
]
},
{
"h": "Map symbols",
"lines": [
"Hypsometric tint uses fixed colour bands (dark green → light green → green → pale yellow → yellow → light brown → brown → white).",
"Peaks are marked with ▲ plus elevation; rivers are blue lines along valleys; cliffs use a red saw-tooth line.",
"North arrow top-right, scale bar bottom-left, tint legend bottom-right, terrain profile along the bottom."
]
}
]
}
}