using System.Collections.Generic; namespace GC.ContourMap; /// 内置全量文案兜底:没有语言包也能完整显示(复刻 HTML 课件全部文案)。 internal static class DefaultTexts { public static readonly Dictionary Zh = new() { // 标题 ["app.title"] = "等高线地形 · 五大典型地貌判读", ["app.subtitle"] = "七年级上册 · 从立体地形到平面等高线,判读山峰/山脊/山谷/鞍部/陡崖", // 实验流程四步 ["flow.title"] = "实验流程", ["flow.step.0"] = "等高切割", ["flow.step.1"] = "形成交线", ["flow.step.2"] = "投影成图", ["flow.step.3"] = "疏密判坡", ["flow.desc.0"] = "观察水平面与山体在同一海拔相交,形成连续闭合线。", ["flow.desc.1"] = "每个水平切面都会留下同高交线,多层交线共同描述山体起伏。", ["flow.desc.2"] = "把各高度交线垂直投影到同一平面,得到完整等高线地形图。", ["flow.desc.3"] = "等高线越密,坡度越陡;等高线越疏,坡度越缓。", // 观察面板 ["observe.title"] = "实验演示", ["observe.default"] = "点击开始实验,在立体地形中观察等高切割与交线形成,再通过四步图解理解投影与判坡。", ["observe.features"] = "判读要点", ["observe.default.f1"] = "同一条等高线上海拔相等", ["observe.default.f2"] = "相邻等高线高差保持一致", // 五大典型地貌 ["side.landforms"] = "五大典型地貌", ["landform.peak"] = "山峰", ["landform.ridge"] = "山脊", ["landform.valley"] = "山谷", ["landform.saddle"] = "鞍部", ["landform.cliff"] = "陡崖", ["landform.peak.sub"] = "闭合等高线", ["landform.ridge.sub"] = "凸低为脊", ["landform.valley.sub"] = "凸高为谷", ["landform.saddle.sub"] = "两峰之间", ["landform.cliff.sub"] = "密集或重合", ["landform.peak.summary"] = "山峰四周较低、中心突起;等高线闭合成环,海拔数值由外向内逐渐升高。", ["landform.ridge.summary"] = "等高线弯曲部分向海拔低处凸出,脊线常成为两侧水系的分水岭。", ["landform.valley.summary"] = "等高线弯曲部分向海拔高处凸出,谷底低洼并容易汇水形成河流。", ["landform.saddle.summary"] = "鞍部位于相邻两座山峰之间,是沿山脊方向相对低洼的过渡地带。", ["landform.cliff.summary"] = "陡崖坡面近直立,不同高程的等高线会高度密集,局部可投影到同一位置而重合。", ["landform.peak.f1"] = "中心海拔高、四周海拔低", ["landform.peak.f2"] = "闭合线越向内,数值越大", ["landform.peak.f3"] = "若数值向内降低,则应判为洼地", ["landform.ridge.f1"] = "等高线凸向低值方向", ["landform.ridge.f2"] = "脊线由高处向低处延伸", ["landform.ridge.f3"] = "雨水沿脊线两侧分流", ["landform.valley.f1"] = "等高线凸向高值方向", ["landform.valley.f2"] = "V 形尖端指向上游高处", ["landform.valley.f3"] = "谷底常发育河流", ["landform.saddle.f1"] = "两组闭合等高线相邻", ["landform.saddle.f2"] = "中部线条收窄,形似马鞍", ["landform.saddle.f3"] = "常是翻越山岭的低垭口", ["landform.cliff.f1"] = "密集表示陡坡,重合才是陡崖特征", ["landform.cliff.f2"] = "单位水平距离内高差很大", ["landform.cliff.f3"] = "n 条线重合时:(n−1)d ≤ ΔH < (n+1)d", ["landform.peak.hint"] = "山峰:闭合曲线,数值向中心升高", ["landform.ridge.hint"] = "山脊:等高线向低处凸出,凸低为脊", ["landform.valley.hint"] = "山谷:等高线向高处凸出,凸高为谷", ["landform.saddle.hint"] = "鞍部:两峰之间相对低洼,俯视轮廓呈收腰形", ["landform.cliff.hint"] = "陡崖:等高线密集或重合,坡度极陡", // 按钮 ["btn.play"] = "开始实验", ["btn.pause"] = "暂停实验", ["btn.replay"] = "重新实验", ["btn.reset"] = "重置", ["btn.view3d"] = "立体图", ["btn.viewTop"] = "俯视图", ["btn.color"] = "上色", ["btn.colorOn"] = "取消上色", ["btn.fullscreen"] = "全屏", ["btn.exitFullscreen"] = "退出全屏", ["btn.backExperiment"] = "返回实验", // 侧栏判读要点(通用地形) ["side.features"] = "五种地形部位", ["feature.peak"] = "山峰", ["feature.peakDesc"] = "等高线闭合,数值由中心向四周递减。", ["feature.ridge"] = "山脊", ["feature.ridgeDesc"] = "等高线凸向低处,脊线是分水线。", ["feature.valley"] = "山谷", ["feature.valleyDesc"] = "等高线凸向高处,谷线是集水线,常发育河流。", ["feature.saddle"] = "鞍部", ["feature.saddleDesc"] = "两个山峰之间的低地,形如马鞍。", ["feature.cliff"] = "陡崖", ["feature.cliffDesc"] = "等高线重叠或非常密集,近乎垂直。", ["feature.slope"] = "坡面", // 判读规则 ["side.rules"] = "判读要点", ["rule.interval"] = "等高距:相邻两条等高线的高度差,本图 100 米。", ["rule.dense"] = "等高线越密坡越陡,越疏坡越缓。", ["rule.index"] = "每 5 条加粗一条计曲线,标注海拔便于读数。", ["rule.height"] = "海拔:某地高出海平面的垂直距离;相对高度:两点海拔之差。", // 底部读数 / 图例 ["footer.hint"] = "拖动立体地形旋转、滚轮缩放;鼠标悬停可查看该点海拔与地形部位", ["footer.readout"] = "海拔 {0} m 相对高度 {1} m", ["legend.title"] = "分层设色", ["profile.title"] = "地形剖面图", ["slope.gentle"] = "缓坡(线疏)", ["slope.steep"] = "陡坡(线密)", ["hint.play"] = "点击“开始实验”,观察等高切割与交线形成", ["hint.playing"] = "实验播放中", ["hint.paused"] = "实验已暂停 · 点击继续恢复播放", ["hint.done"] = "实验流程播放完成 · 可重新实验或选择典型地貌观察" }; public static readonly Dictionary En = new() { ["app.title"] = "Contour Lines · Five Classic Landforms", ["app.subtitle"] = "Grade 7 · From 3D relief to contour maps: peaks, ridges, valleys, saddles and cliffs", ["flow.title"] = "Experiment flow", ["flow.step.0"] = "Contour cutting", ["flow.step.1"] = "Forming lines", ["flow.step.2"] = "Projection", ["flow.step.3"] = "Slope density", ["flow.desc.0"] = "Watch a horizontal plane intersect the mountain at one elevation, forming closed lines.", ["flow.desc.1"] = "Each horizontal slice leaves an equal-height line; stacked lines describe the relief.", ["flow.desc.2"] = "Project every intersection line vertically onto one plane to build the contour map.", ["flow.desc.3"] = "Contours closer together mean a steeper slope; wider apart mean a gentler one.", ["observe.title"] = "Experiment demo", ["observe.default"] = "Press play to watch contour cutting and line formation, then use the four steps to learn projection and slope reading.", ["observe.features"] = "Key points", ["observe.default.f1"] = "All points on one contour share the same elevation", ["observe.default.f2"] = "Neighbouring contours keep a constant height interval", ["side.landforms"] = "Five classic landforms", ["landform.peak"] = "Peak", ["landform.ridge"] = "Ridge", ["landform.valley"] = "Valley", ["landform.saddle"] = "Saddle", ["landform.cliff"] = "Cliff", ["landform.peak.sub"] = "Closed contours", ["landform.ridge.sub"] = "Bulges toward low ground", ["landform.valley.sub"] = "Bulges toward high ground", ["landform.saddle.sub"] = "Between two peaks", ["landform.cliff.sub"] = "Dense or overlapping", ["landform.peak.summary"] = "A peak rises in the centre with lower ground around it; contours close into rings and values increase inward.", ["landform.ridge.summary"] = "Contours bulge toward lower ground; a ridge line often divides two drainage systems.", ["landform.valley.summary"] = "Contours bulge toward higher ground; valleys are low and collect water into streams.", ["landform.saddle.summary"] = "A saddle lies between two adjacent peaks, a relatively low pass along the ridge.", ["landform.cliff.summary"] = "A cliff face is nearly vertical, so contours crowd tightly or even overlap.", ["landform.peak.f1"] = "High centre, low surroundings", ["landform.peak.f2"] = "Closed lines grow in value inward", ["landform.peak.f3"] = "If values drop inward, it is a depression", ["landform.ridge.f1"] = "Contours bulge toward lower values", ["landform.ridge.f2"] = "Ridge line runs from high to low", ["landform.ridge.f3"] = "Rain drains to either side of the ridge", ["landform.valley.f1"] = "Contours bulge toward higher values", ["landform.valley.f2"] = "V tip points upstream to high ground", ["landform.valley.f3"] = "Streams often form along the valley floor", ["landform.saddle.f1"] = "Two neighbouring closed contour groups", ["landform.saddle.f2"] = "Contours pinch in the middle like a saddle", ["landform.saddle.f3"] = "Often a low mountain pass", ["landform.cliff.f1"] = "Dense means steep; overlap means cliff", ["landform.cliff.f2"] = "Large elevation change over a short distance", ["landform.cliff.f3"] = "n overlapping lines: (n−1)d ≤ ΔH < (n+1)d", ["landform.peak.hint"] = "Peak: closed curves, values rise toward the centre", ["landform.ridge.hint"] = "Ridge: contours bulge toward low ground", ["landform.valley.hint"] = "Valley: contours bulge toward high ground", ["landform.saddle.hint"] = "Saddle: low ground between two peaks", ["landform.cliff.hint"] = "Cliff: contours dense or overlapping, very steep", ["btn.play"] = "Start experiment", ["btn.pause"] = "Pause experiment", ["btn.replay"] = "Replay experiment", ["btn.reset"] = "Reset", ["btn.view3d"] = "3D view", ["btn.viewTop"] = "Top view", ["btn.color"] = "Colour", ["btn.colorOn"] = "No colour", ["btn.fullscreen"] = "Fullscreen", ["btn.exitFullscreen"] = "Exit fullscreen", ["btn.backExperiment"] = "Back to experiment", ["side.features"] = "Five terrain features", ["feature.peak"] = "Peak", ["feature.peakDesc"] = "Closed contours; values decrease outward from the centre.", ["feature.ridge"] = "Ridge", ["feature.ridgeDesc"] = "Contours bulge toward lower ground; a watershed line.", ["feature.valley"] = "Valley", ["feature.valleyDesc"] = "Contours bulge toward higher ground; a drainage line, often a stream.", ["feature.saddle"] = "Saddle", ["feature.saddleDesc"] = "Low ground between two peaks, shaped like a saddle.", ["feature.cliff"] = "Cliff", ["feature.cliffDesc"] = "Contours overlap or crowd tightly — nearly vertical.", ["feature.slope"] = "Slope", ["side.rules"] = "Key rules", ["rule.interval"] = "Contour interval: height gap between neighbours (100 m here).", ["rule.dense"] = "Closer contours = steeper slope; wider spacing = gentler.", ["rule.index"] = "Every 5th contour is bolded and labelled as an index contour.", ["rule.height"] = "Elevation above sea level; relative height is the difference of two elevations.", ["footer.hint"] = "Drag the 3D terrain to rotate, scroll to zoom; hover to read elevation and terrain feature", ["footer.readout"] = "Elevation {0} m Relative height {1} m", ["legend.title"] = "Hypsometric tint", ["profile.title"] = "Terrain profile", ["slope.gentle"] = "Gentle (sparse lines)", ["slope.steep"] = "Steep (dense lines)", ["hint.play"] = "Press start to watch contour cutting and line formation", ["hint.playing"] = "Experiment playing", ["hint.paused"] = "Experiment paused · press to resume", ["hint.done"] = "Experiment finished · replay or choose a landform" }; }